Bosch 16682 right oxygen sensor for the 2006-2013 Volvo C70 5-cylinder 2.5L and other vehicles reads the oxygen in the exhaust and reports it to the ECU. This Bosch O2 sensor is a heated, narrow-band switching-type design that gives the ECU the readings it needs to hold the air-fuel ratio steady.
- Air-fuel-ratio readings to the ECU support stable combustion control and lower emissions
- Reaches operating temperature in under 10 seconds for quick closed-loop control after a cold start
- Metal housing, integrated heater element and TSP coating resist vibration, corrosion and contamination
- Built to withstand exhaust streams up to 1,880°F
Quick facts
- Part: Bosch 16682 oxygen sensor
- Fits: 2006-2013 Volvo C70 5-cylinder 2.5L and other vehicles
- Position: Upstream, downstream, downstream right
- Material: Metal (housing)
- Condition: New
A lit check engine light, rough idle or poorer fuel economy can point to an oxygen sensor that is no longer reporting correctly, though a different fault can show up the same way. Before you replace it, look at the wiring and connector with the engine off and cool for cracks, melted insulation or damage, and leave any live test to a shop.
Fits
This oxygen sensor is listed for a wide range of Volvo and Saab models, led by the 2006-2013 Volvo C70 5-cylinder 2.5L, the 2008-2013 Volvo C30 5-cylinder 2.5L and the 2004-2011 Volvo S40 5-cylinder 2.5L. If your car is not one of those, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: upstream, downstream, downstream right
- Quantity per vehicle: varies by application
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 29.1 in
Build and materials
- Sensor type: narrow-band, heated
- Housing material: metal
- Coating: TSP
- Wiring harness: included
- Condition: new
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
- Country of origin: United States
In the box
One oxygen sensor with its wiring harness. The 2006-2013 Volvo C70 5-cylinder 2.5L takes one sensor. A mounting bracket is not included.
Installation notes
- Direct-fit connectors and pre-applied conductive anti-seize on the threads are there for quick installation.
Frequently Asked Questions
Does Bosch 16682 work as an oxygen sensor for the 2006-2013 Volvo C70 5-cylinder 2.5L?
Yes. Bosch 16682 is listed for the 2006-2013 Volvo C70 5-cylinder 2.5L, and that engine takes one sensor.
Can I use this oxygen sensor on the 2008-2013 Volvo C30 5-cylinder 2.5L?
Yes. The 2008-2013 Volvo C30 5-cylinder 2.5L is in the fitment for this sensor and takes one. For another year or engine, use the "Vehicles it fits" section.
Is this Bosch premium oxygen sensor a heated narrow-band type?
Yes. Bosch 16682 is a heated, narrow-band switching-type sensor with an M18 - 1.5 thread and a 22 mm hex.
Does this oxygen sensor come with its wiring harness?
Yes. The wiring harness is included with the sensor. A mounting bracket is not included.
What warranty covers this Bosch oxygen sensor?
Bosch gives a 1-year, unlimited-mileage warranty on it for non-commercial passenger cars and light trucks.
