Bosch Oxygen Sensor P/N:13524
Bosch 16864 left oxygen sensor for the 2007-2010 BMW X5 V8 4.8L and other vehicles reports exhaust oxygen to the ECU. This Bosch O2 sensor helps the ECU keep combustion stable and emissions down.
A failing oxygen sensor can bring on a check engine light, a failed emissions test or a change in fuel economy. Other faults produce the same signs, so find the cause before replacing the sensor. With the engine off and cool, look over the wiring and connector for damage, and leave signal testing to a shop.
This sensor fits the 2007-2010 BMW X5 V8 4.8L and the 2007-2008 BMW 760Li V12 6.0L, and each takes one at this position. This listing is one sensor for the downstream left; the other positions are ordered separately.
Fit and size
Build and materials
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Will this oxygen sensor fit a 2007-2010 BMW X5 V8 4.8L?
Yes. Bosch 16864 is the downstream left sensor for the 2007-2010 BMW X5 V8 4.8L, and the car takes one at that position.
Is this Bosch premium oxygen sensor heated?
Yes. It is a heated narrow-band sensor with an integrated heater element, and it reaches operating temperature in under 10 seconds.
Does the 16864 come with its wiring harness?
Yes. Bosch 16864 includes the wiring harness and has conductive anti-seize pre-applied to the threads. A mounting bracket is not included.
What thread and hex size does this sensor use?
The thread size is M18 - 1.5 with a 22 mm hex. Length from the sealing surface to the end of the connector is 12 in.
What can a failing downstream oxygen sensor look like?
It can show up as a check engine light, a failed emissions test or a change in fuel economy. Damaged wiring or a cracked connector, seen with the engine off and cool, is another clue.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.