Bosch Oxygen Sensor P/N:16615
Bosch 17452 sensor for the 2014-2019 Ford Fiesta 1.6L is a heated Bosch 02 sensor that measures oxygen in the exhaust and reports the air-fuel ratio to the ECU.
A check engine light, poor fuel economy or a rough idle can mean the upstream sensor is worn or slow to respond. Those signs alone don't prove the sensor is bad, since a vacuum leak can set them off too, so find the cause before replacing it.
It is a direct-fit sensor for the 2014-2019 Ford Fiesta 1.6L, which takes one in the upstream position.
Fit and size
Build and materials
One sensor with its wiring harness. A mounting bracket is not included.
Is Bosch 17452 the upstream or downstream sensor on a 2014-2019 Ford Fiesta 1.6L?
Bosch 17452 is the upstream sensor for the 2014-2019 Ford Fiesta 1.6L and is a direct-fit replacement in that position.
What thread and hex size does this Bosch sensor use?
This upstream sensor has an M18 - 1.5 thread and a 22 mm hex, with a 17.7 in overall length.
Is a wiring harness included with the Bosch 17452 sensor?
Yes. The Bosch 17452 comes with its 14.4 in wiring harness; a mounting bracket is not included.
What signs can point to a worn upstream heated sensor?
A check engine light, a drop in fuel economy or a failed emissions test can mean this upstream sensor is worn or slow to respond.
How fast does this switching-type sensor heat up?
This switching-type sensor reaches operating temperature in under 10 seconds, so the ECU gets a usable signal sooner for quicker closed-loop control after a cold start.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.