Sunsong Brake Hydraulic Hose P/N:2202683
Keep pressurized brake fluid flowing to the front left wheel with the Sunsong brake hose, part number 2206166. This front left brake hydraulic hose is a direct-fit replacement for many vehicles, among them the 2012-2019 Nissan Versa, 2012-2020 Nissan March, and 2018-2019 Nissan Micra. See the "Vehicles it fits" section for the full list and engine details.
Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines. It designs its products around what installers need. The flexible hose carries brake fluid between the vehicle's rigid brake line and the brake at the wheel, and it flexes as the suspension and steering move.
Signs a brake hose may need replacing include a soft or spongy pedal, fluid seeping at the hose or its fittings, and cracking, bulging, or chafing on the outer cover. If the front left hose is the cause, this Sunsong brake hydraulic hose replaces it. After installation, bleed the brakes following the vehicle service information.
Interchange: 073-2084 · 150.42140 · 350-67101
BH621955 · BHA621955 · 462111HJ0B · 462111HK0A · H621955 · 777738 · 683422 · BH383671 · BH144740 · 0732084 · 15042140 · 35067101
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Sunsong 2206166 fit?
It fits the front left position on many vehicles, among them the 2012-2019 Nissan Versa, 2012-2020 Nissan March, and 2018-2019 Nissan Micra. See the "Vehicles it fits" section for the full list and engine details.
What standards does this brake hose meet?
Sunsong states it meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
Does it come with brackets or copper washers?
Brackets, grommets, guards, wire clips, and protective sleeves are included as the application requires. Hoses with banjo end fittings include new copper washers.
What are signs a brake hose may need replacing?
Common signs are a soft or spongy pedal, fluid leaking at the hose or fittings, and cracks, bulges, or chafing on the hose. Other brake faults can cause similar symptoms, so diagnose the cause before replacing parts.
Do I need to bleed the brakes after installing this hose?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes afterward. Follow the vehicle service information for the correct procedure and fluid.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.