Centric Parts Brake Hydraulic Hose P/N:150.65129
Keep pressurized brake fluid moving to the wheel with the Centric Parts brake hydraulic hose, part number 150.44047. It is a direct-fit replacement for the front right position on the 1992-1996 Toyota Camry, 1995-1996 Toyota Avalon and 1992-1996 Lexus ES300. See the "Vehicles it fits" section for engine-level details.
A brake hydraulic hose is the flexible section of the brake system. It links the vehicle's rigid brake line to the brake at the wheel, carrying fluid under pressure while it bends with suspension travel and steering. Centric describes its brake hoses as high-quality aftermarket replacements with the widest application coverage in the aftermarket.
Signs this part may need replacing: a cracked, swollen or chafed hose, fluid seeping around the fittings, or a soft or spongy brake pedal. These symptoms can have other causes, so inspect the brake system before replacing parts. The brakes must be bled after installation. Consult the vehicle service information for the correct sealing washers, fasteners and torque values. It is good practice to inspect the front left hose at the same time.
Product information is for general reference and may contain errors. See our Disclaimer.
What does the Centric Parts brake hydraulic hose do?
It is the flexible link that carries brake fluid under pressure from the rigid brake line to the brake at the front right wheel. It flexes as the suspension and steering move.
Which vehicles does Centric 150.44047 fit?
It is listed for the 1992-1996 Toyota Camry, 1995-1996 Toyota Avalon and 1992-1996 Lexus ES300. See the "Vehicles it fits" section for details on your exact vehicle.
Which wheel position is this brake hose for?
This hose is cataloged for the front right position on the listed applications.
What are signs a brake hose may need replacing?
Signs include cracks, bulges or chafing on the hose, fluid seeping at the fittings, or a soft or spongy pedal. Other brake faults can cause similar symptoms, so inspect the system before replacing parts.
Do I need to bleed the brakes after installing the hose?
Yes. Opening the hydraulic system lets air in, so bleed the brakes afterward. Consult the vehicle service information for the correct sealing washers, fasteners and torque values.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.