CARDONE New CV Axle Assembly P/N:66-3541
CARDONE New 66-1372 front right CV axle for the 2006-2011 Chevrolet HHR and other vehicles carries drive torque from the transmission to the front right wheel. This complete CV axle assembly includes both CV joints, a steel shaft and neoprene boots.
Clicking when you turn hard under power, grease on the chassis from a torn boot, or vibration when you accelerate can mean an axle is worn. A worn wheel bearing or a broken engine mount can be behind similar noise or vibration, so find the cause before you buy an axle.
This front right CV axle is a direct-fit replacement for the 2006-2011 Chevrolet HHR, the 2005-2010 Chevrolet Cobalt and the 2007-2010 Pontiac G5. Driving something else? Look up your car in the "Vehicles it fits" section.
Fit and size
Build and materials
One complete axle with a new axle nut and an instruction sheet. This listing is one axle for the front right; that side takes one, and the front left is a separate part ordered on its own.
Interchange: 22710928
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is 66-1372 a Chevy Cobalt cv axle for the 2005-2010 model years?
Yes. CARDONE New 66-1372 is a front right CV axle that fits the 2005-2010 Chevrolet Cobalt. For a different car, look it up in the "Vehicles it fits" section.
Is this a Chevy HHR cv axle replacement for the 2006-2011 model years?
Yes. CARDONE New 66-1372 fits the front right of the 2006-2011 Chevrolet HHR. For a 2006-2011 Chevrolet HHR axle replacement on the left side, the front left is a separate part.
Does this CV axle come with a new axle nut?
Yes. CARDONE New 66-1372 comes with a new hex axle nut (M20x1.5 thread, 30 mm socket), plus an instruction sheet. The ABS tone ring is not included.
What shaft diameter and spline count does this front right axle have?
The shaft is 25 mm (0.984 in) in diameter. The inboard joint has 34 splines and the outboard joint has 33 splines.
Should I use an impact wrench to tighten the axle nut on this CV axle?
No. Use a torque wrench set to the vehicle's specification, never an impact wrench, and fit the new nut that comes with this axle.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.