CARDONE New CV Axle Assembly P/N:66-3541
A1 CARDONE 66-1401 front right CV axle for the 2005-2006 Chevrolet Equinox and other vehicles carries engine torque from the transaxle to the front right wheel. The design comes from research into why original CV axle assemblies typically fail, with new solutions to avoid repeat failure.
Clicking or snapping when you turn hard under power, grease around a torn boot, or a thump and vibration when accelerating can mean an axle joint is wearing out. These signs alone do not prove the axle is the problem; a broken engine mount can cause a similar thump and vibration.
This CV axle fits the 2005-2006 Chevrolet Equinox and the 2006 Pontiac Torrent. The listing is one side of the front axle, and the other side is normally done at the same time.
Fit and size
Build and materials
One complete CV axle with its axle nut and an instruction sheet. The front right takes one; the front left is ordered separately.
Interchange: 22713653
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this work as a Chevy Equinox CV axle for a 2005-2006 model?
Yes. A1 CARDONE 66-1401 is a front right CV axle that fits the 2005-2006 Chevrolet Equinox and the 2006 Pontiac Torrent. The front left side is a separate part.
Does the A1 CARDONE CV axle come with a new axle nut?
Yes. This A1 CARDONE 66-1401 CV axle comes with a new hex axle nut, its CV joints and an instruction sheet. The ABS tone ring is not included.
What size is the axle nut on the A1 CARDONE CV drive axle?
The nut has an M27x2.0 thread, a 34 mm socket size and is 18 mm long. It is a hex nut supplied with the axle.
What can clicking when I turn the wheel hard under power mean?
Clicking or snapping on a hard turn under power can mean a worn outer CV joint. Grease thrown from a torn boot is another sign, and a shop can confirm which part is at fault.
What should I do with the old locking nut when installing A1 CARDONE axles?
Discard it and install the new axle nut supplied with the 66-1401. Tighten the new nut with a torque wrench, not an impact wrench.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.