Front Right CV Axle for 1997-2002 Ford Escort & More - CARDONE New 66-2134

$125.99

Vehicles this part fits

    Part number: 66-2134
    UPC: 082617635318
    Condition: New
    Weight: 16.80 LBS
    Item Package Quantity: 1
    $125.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-2134
    CARDONE New CV Axle Assembly P/N:66-2134
    $125.99
    $125.99

    CARDONE New 66-2134 front right CV axle for the 1997-2002 Ford Escort and other vehicles sends drive torque from the transmission to the wheel. This CV axle assembly is engineered around the reasons original CVs typically fail.

    • Neoprene boots with additional bellows, when needed, to resist bellow stress and cracking
    • Shaft individually verified for straightness for vibration-free performance at all speeds
    • New axle retaining nut supplied with every axle
    • Boot clamps pneumatically crimped to seal the boot to the housing
    • Grease that withstands high-temperature and high-torque demands
    • Precision-rolled splines for proper fit into the mating hub and transmission

    Quick facts

    • Part: CARDONE New 66-2134 CV axle
    • Also called: CV axle assembly
    • Fits: 1997-2002 Ford Escort and other vehicles
    • Position: Front right
    • Material: Steel shaft, neoprene boot
    • Condition: New

    Clicking or snapping on hard turns, a thump or vibration when you accelerate, or grease flung onto the chassis and suspension can mean a CV joint or boot is failing. Before replacing the axle, look over the boots where you can see them, with the engine off, for splits or grease. A broken engine mount can also bind the inner joint, and a shop can sort out the cause.

    Fits

    It fits the 1997-2002 Ford Escort and the 1997-1999 Mercury Tracer, one on each side. This listing is the front right axle; the front left is a separate part and is normally replaced at the same time.

    Specifications

    Fit and size

    • Position: Front right
    • Quantity per vehicle: 1
    • Shaft diameter: 25 mm (0.984 in)
    • Compressed length: 917.58 mm (36.125 in)
    • Splines: 26 inboard, 26 outboard
    • Axle nut: hex, M22x1.5 thread, 32 mm socket size, 21 mm long

    Build and materials

    • Construction: complete axle with CV joints
    • Shaft material: Steel
    • Boot material: Neoprene
    • ABS tone ring: included, toothed, 44 teeth
    • Condition: New
    • Country of origin: China

    In the box

    One complete CV axle with a new axle retaining nut, and an instruction sheet.

    Installation notes

    • Remove and install one CV axle at a time.
    • Install new transaxle seals when replacing CV axles to avoid leaks.
    • Tighten the axle nut with a torque wrench to the manufacturer's specification; never use an impact wrench on it.
    • Never let a CV axle hang unsupported, since that can separate the axle and damage the inner joint.

    Interchange: F7CZ3B436BA

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    F7CZ3B436BA

    Frequently Asked Questions

    Is this a CV axle replacement for a 1998 Ford Escort in the 1997-2002 range?

    Yes. CARDONE New 66-2134 fits the 1997-2002 Ford Escort, which includes 1998, and the 1997-1999 Mercury Tracer. This one is the front right axle.

    Does the CARDONE 66-2134 axle come with a new axle nut?

    Yes. CARDONE New 66-2134 includes a new hex axle retaining nut (M22x1.5 thread, 32 mm socket size) and an instruction sheet, because the original nut is likely worn or stripped.

    Does this front right axle include the ABS tone ring?

    Yes. The toothed ABS tone ring is included, with 44 teeth.

    What can clicking when I turn with the wheel cut hard mean on a CV axle?

    Clicking or snapping on hard turns can point to a worn outer joint, and grease on the chassis or suspension can mean a torn boot. A shop can confirm which.

    Can I use an impact wrench to tighten the axle nut on this CV axle?

    No. Use a torque wrench and tighten the nut to the vehicle manufacturer's specification. An impact wrench should never be used on the retaining nut.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review