CARDONE New CV Axle Assembly P/N:66-3541
A1 CARDONE 66-3108 front right CV axle for the 1996-2007 Dodge Grand Caravan and other vehicles carries drive torque from the transaxle to the wheel through two flexing joints. This new CV axle assembly is built to OE form, fit and function, with changes aimed at the failures that hit original axles.
Clicking when you turn under power, a thump or vibration when accelerating, or grease thrown onto nearby chassis parts can mean a worn joint or a torn boot. With the engine off, look at the boot for splits or flung grease before replacing anything, since the same noises can come from other front-end parts.
Besides the 1996-2007 Dodge Grand Caravan, this axle fits the 1996-2007 Chrysler Town & Country and the 1996-2008 Chrysler Voyager. This listing is one axle for the front right; the front left is a separate part, and the two are normally replaced together.
Fit and size
Build and materials
One complete front right axle with its CV joints and ABS tone ring, a new axle retaining nut and an instruction sheet.
Interchange: 4641856AA · 4641856AC · 4641856AD · 4641856AF · 4808538 · 4808568
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the A1 CARDONE 66-3108 fit a 1996-2007 Dodge Grand Caravan?
Yes. A1 CARDONE 66-3108 is a front right axle for the 1996-2007 Dodge Grand Caravan and the 1996-2007 Chrysler Town & Country; for any other car, look in the "Vehicles it fits" section.
Does the A1 CARDONE CV drive axle 66-3108 come with a new axle nut?
Yes. A1 CARDONE 66-3108 comes as a complete axle with CV joints, a new hex axle nut (M22x1.5), the ABS tone ring and an instruction sheet.
Is the shaft steel on A1 CARDONE axles such as this 66-3108?
Yes. The A1 CARDONE 66-3108 shaft is steel and 27 mm (1.063 in) across, with a neoprene boot that has 6 ribs.
Why might a front right CV axle click when I turn and accelerate?
A worn outer joint or a torn boot that has let the grease out can cause it, and the sound can also come from other parts. Have it checked promptly rather than driving on it.
Can I use an impact wrench on the axle nut of this CV axle?
No. Tighten the axle nut with a torque wrench to specification, and use the new nut supplied with A1 CARDONE 66-3108 rather than the old one.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.