CARDONE New CV Axle Assembly P/N:66-3541
CARDONE New 66-3188 front right CV axle for the 1996-1997 Dodge Intrepid and other vehicles carries drive torque from the transaxle to the wheel. This CV axle assembly comes with its CV joints and a steel shaft, built to meet O.E. form, fit and function.
A worn axle can show up as clicking or snapping when you turn with the wheel cut, a thump or vibration when you accelerate, or a torn boot with grease on the chassis or suspension. Before you replace the axle, rule out a broken engine mount, and damaged sensor wiring if the ABS light came on after an earlier axle swap; a shop can test both.
This front right CV axle also fits the 1996-1997 Chrysler Concorde and the 1996-1997 Chrysler Intrepid. To check your exact model and engine, open the "Vehicles it fits" section.
Fit and size
Build and materials
One front right CV axle with a new axle retaining nut and an instruction sheet. This listing holds one axle, and the front right takes one; the front left is a separate part.
Interchange: 4798096 · 4798099 · 4798776 · 4798777
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the CARDONE 66-3188 axle right for the 1996-1997 Chrysler Concorde?
Yes. CARDONE 66-3188 is a front right CV axle for the 1996-1997 Chrysler Concorde. Open the "Vehicles it fits" section to check other models.
Does the CARDONE 66-3188 CV axle come with a new axle nut?
Yes. This CARDONE 66-3188 comes with the complete axle, a new hex axle nut with M27x2.0 thread, and an instruction sheet.
Does this front right CV axle include an ABS tone ring?
Yes. The axle includes a toothed ABS tone ring with 50 teeth.
What can a clicking noise when turning mean on a CV axle?
Clicking or snapping when you turn with the wheel cut can point to a worn outer CV joint. A torn boot with grease on the chassis or suspension is another sign.
Can I use an impact wrench on this CV axle's retaining nut?
No. Use a torque wrench and tighten the retaining nut to the manufacturer's specifications. An impact wrench should never be used on it.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.