CARDONE New CV Axle Assembly P/N:66-3541
A1 CARDONE 66-3471 front left CV axle for the 2001-2006 Hyundai Elantra and other vehicles carries drive torque from the transmission to the wheel hub. This new complete axle, also called a CV axle assembly, includes both CV joints.
A clicking or snapping noise when turning, a vibration under acceleration, or grease thrown from a torn boot can mean the axle is worn. Other parts can produce similar noises, so look the boots over with the engine off for tears or grease on the chassis and suspension before replacing the axle.
It fits the 2001-2006 Hyundai Elantra, works as a 2004-2009 Kia Spectra CV axle and fits the 2005-2009 Kia Spectra5, among other vehicles. Open the "Vehicles it fits" section to check your exact model and engine. This listing is one axle for the front left; the front right is a separate part, and the two sides are normally replaced together. A 2001-2006 Hyundai Elantra takes one axle on this side.
Fit and size
Build and materials
One complete CV axle with a new axle retaining nut and an instruction sheet.
Interchange: 495002C810 · 495002D410 · 495002D411 · 495002D412 · 495002D413 · 495012C800 · 495012C810 · 495012D400 · 495012D401 · 495012D402 · 495012D403 · 495012D410 · 495012D411 · 495012D412 · 495012D413 · 495012F200 · 495012F201 · 495012F210 · 495012F211
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is A1 CARDONE 66-3471 a Hyundai Elantra CV axle for 2001-2006 models?
Yes. A1 CARDONE 66-3471 fits the 2001-2006 Hyundai Elantra on the front left side. For another car, open the "Vehicles it fits" section to check its exact model and engine.
Can I use this as a 2001-2006 Hyundai Elantra CV axle replacement on the front right?
No. This listing is one axle for the front left; the front right is a separate part and is ordered separately.
Does this CV axle come with a new axle nut?
Yes. A1 CARDONE 66-3471 includes a new hex axle retaining nut (M22x1.5) with the complete axle and an instruction sheet.
Does this front left axle include the ABS tone ring?
Yes. This axle has a toothed ABS tone ring with 44 teeth. Its steel shaft is 27 mm (1.063 in) in diameter.
Can I use an impact wrench to tighten the nut on A1 CARDONE 66-3471?
No. Use a torque wrench and tighten the nut to the vehicle manufacturer's specification; never use an impact wrench on the axle nut.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.