Front Right CV Axle for 2003-2006 Toyota Matrix & More - A1 CARDONE 66-5230

$196.99

Vehicles this part fits

    Part number: 66-5230
    UPC: 884548202917
    Condition: New
    Weight: 22.00 LBS
    Item Package Quantity: 1
    $196.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-5230
    CARDONE New CV Axle Assembly P/N:66-5230
    $196.99
    $196.99

    A1 CARDONE 66-5230 front right CV axle for the 2003-2006 Toyota Matrix and other vehicles sends drive torque from the transmission to the front right wheel. This CV axle assembly includes both CV joints, which flex with steering and suspension travel.

    • Neoprene boots with extra bellows where needed to resist bellows stress and cracking
    • Each axle shaft is individually verified for straightness for vibration-free performance at all speeds
    • New axle retaining nut supplied, since the original nut is likely worn or stripped
    • Boot clamps are pneumatically crimped to seal the boot to the housing
    • Grease withstands high-temperature and high-torque demands
    • Precision-rolled splines and threads for proper fit in the hub, transmission and axle nut

    Quick facts

    • Part: A1 CARDONE 66-5230 CV axle
    • Also called: CV axle assembly
    • Fits: 2003-2006 Toyota Matrix and other vehicles
    • Position: Front right
    • Material: Steel shaft, neoprene boots
    • Condition: New

    A clicking or snapping noise when turning under throttle, a thump or vibration on acceleration, or grease around the chassis and suspension can mean a worn joint or a torn boot. Other problems can cause similar signs, so with the engine off, look over the boots for splits or flung grease before replacing the axle.

    Fits

    It is a direct-fit replacement for the 2003-2006 Toyota Matrix and the 2003-2006 Pontiac Vibe, and it meets O.E. form, fit and function. This listing is one axle for the front right side, where one axle is used; the front left is a separate part ordered on its own.

    Specifications

    Fit and size

    • Position: front right
    • Quantity per vehicle: 1
    • Shaft diameter: 28 mm (1.102 in)
    • Compressed length: 930 mm (36.614 in)
    • Inboard joint: splined, 20 splines
    • Outboard joint: splined, 26 splines
    • Axle nut: hex, M22x1.5 thread, 32 mm socket size

    Build and materials

    • Condition: new
    • Shaft material: steel
    • Boot material: neoprene, 5 ribs
    • CV joints: included
    • ABS tone ring: included, toothed, 48 teeth
    • Country of origin: China

    In the box

    One complete CV axle with its CV joints, a new axle retaining nut and an instruction sheet.

    Installation notes

    • Discard the old locking (prevailing torque) nut and use the new nut supplied; it should never be reused.
    • Use a torque wrench, never an impact wrench, and torque the nut to the manufacturer's specification.
    • Never let the axle hang unsupported, which can lead to axle separation and inner joint damage.
    • Remove and install one axle at a time.

    Interchange: 88969961 · 88969963 · 4341001090 · 4341001100

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    88969961, 88969963, 4341001090, 4341001100

    Frequently Asked Questions

    Is this the right axle replacement for the 2003-2006 Toyota Matrix?

    Yes. A1 CARDONE 66-5230 is a direct-fit front right CV axle for the 2003-2006 Toyota Matrix, and it also fits the 2003-2006 Pontiac Vibe. The front left side is a separate part.

    Does the A1 CARDONE cv axle come with a new axle nut?

    Yes. Each A1 CARDONE 66-5230 comes with a new M22x1.5 hex axle retaining nut (32 mm socket), along with the complete axle, CV joints and an instruction sheet.

    What are the shaft size and spline counts on this A1 CARDONE cv drive axle?

    The shaft is 28 mm (1.102 in) in diameter, with 20 splines at the inboard joint and 26 at the outboard joint. Compressed length is 930 mm (36.614 in).

    Is a split boot a reason to replace this CV axle?

    Yes, have it checked or replaced promptly. A split boot lets grease out and lets water and dirt in, which can damage the joint, so do not keep driving on it.

    Should I install new transaxle seals with A1 CARDONE axles?

    Yes. New transaxle seals should go in whenever a CV axle is replaced, to avoid leaks at the transmission.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review