Front Right CV Axle for 1989-1992 Ford Probe & More - CARDONE 66-8023

$104.99

Vehicles this part fits

    Part number: 66-8023
    UPC: 082617636186
    Condition: New
    Weight: 16.00 LBS
    Item Package Quantity: 1
    $104.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-8023
    CARDONE New CV Axle Assembly P/N:66-8023
    $104.99
    $104.99

    CARDONE 66-8023 front right CV axle for the 1989-1992 Ford Probe and other vehicles carries drive torque from the transmission to the wheel hub. This CV axle assembly is built to OE form, fit and function, with a new axle nut in the package.

    • Neoprene boots with additional bellows, when needed, to resist bellow stress and cracking, the leading cause of boot failure
    • Each shaft is individually verified for straightness
    • Boot clamps are pneumatically crimped to seal the boot to the housing
    • Precision-rolled splines for the mating hub and transmission, and precision-rolled threads for the axle nut
    • Grease that withstands high-temperature and high-torque demands
    • Transmission seal diameter precision-machined after heat treatment for a correct seal surface finish

    Quick facts

    • Part: CARDONE 66-8023 CV axle
    • Also called: CV axle assembly
    • Fits: 1989-1992 Ford Probe and other vehicles
    • Position: Front right
    • Material: Steel shaft, neoprene boot
    • Condition: New

    Clicking or snapping when you turn with the wheel cut hard, a thump or vibration when you accelerate, or grease on the chassis and suspension can mean a worn axle or a torn boot. Before you replace the axle, rule out a broken engine mount, which can misalign it, and a damaged ABS sensor ring or its wiring, which can set the ABS light. This listing is one axle for the front right; the car takes one on each side, and the front left is ordered separately.

    Fits

    It fits the 1989-1992 Ford Probe, the 1988-1992 Mazda 626 and the 1988-1992 Mazda MX-6.

    Specifications

    Fit and size

    • Position: Front right
    • Quantity per application: 1
    • Shaft diameter: 27 mm (1.063 in)
    • Compressed length: 555.62 mm (21.875 in)
    • Inboard spline quantity: 26
    • Outboard spline quantity: 26
    • Axle nut thread size: M22x1.5
    • Axle nut socket size: 32 mm (1.26 in)
    • Axle nut length: 21 mm (0.827 in)

    Build and materials

    • Shaft material: Steel
    • Boot material: Neoprene, 3 ribs
    • Joint type: Splined inboard and outboard
    • Axle nut type: Hex
    • ABS tone ring: included, toothed, 90 teeth
    • Condition: New
    • Country of origin: China

    In the box

    One complete CV axle with a new axle retaining nut, plus an instruction sheet.

    Installation notes

    • A new axle retaining nut is supplied because the original is often worn or stripped; a locking-style nut is never reused.
    • Torque the nut to the manufacturer's specification with a torque wrench, not an impact wrench.
    • Install new transaxle seals, and remove and install one axle at a time.
    • Never let the axle hang unsupported, which can separate it and damage the inner joint.

    Interchange: E92Z3B436A · F02Z3B436A · G03325500B · G04325500B · GA4325500A

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    E92Z3B436A, F02Z3B436A, G03325500B, G04325500B, GA4325500A

    Frequently Asked Questions

    Is this a CV axle for the 1988-1992 Mazda 626?

    Yes. CARDONE 66-8023 is a front right CV axle that fits the 1988-1992 Mazda 626. The front left side is a separate part.

    Do CARDONE axles such as the 66-8023 come with a new retaining nut?

    Yes. CARDONE 66-8023 includes a new hex axle nut (M22x1.5, 32 mm socket) with the complete axle and an instruction sheet.

    Does this CARDONE CV axle have an ABS tone ring?

    Yes. This axle includes a toothed ABS tone ring with 90 teeth.

    Is this a CARDONE HD CV axle?

    No. HD part numbers are severe-duty axles with a thermoplastic outboard boot. This axle has neoprene boots and no HD suffix.

    Can I tighten the axle nut with an impact wrench?

    No. Use a torque wrench and tighten the nut to the manufacturer's specification. An impact wrench is not recommended for this nut.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review