Front Left Brake Caliper for 2001-2007 Ford Escape & More - A1 CARDONE 2C-4778

$205.99

Vehicles this part fits

    Part number: 2C-4778
    UPC: 884548289697
    Condition: New
    Weight: 12.00 LBS
    Item Package Quantity: 1
    $205.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New Disc Brake Caliper P/N:2C-4778
    CARDONE New Disc Brake Caliper P/N:2C-4778
    $205.99
    $205.99

    A1 CARDONE 2C-4778 front left brake caliper for the 2001-2007 Ford Escape and other vehicles clamps the brake pads against the rotor to slow the wheel. This new A1 CARDONE caliper is a floating type with one steel piston and a zinc-plated finish, and it is a direct-fit part engineered to meet or exceed O.E. performance.

    • Zinc-plated silver finish with a rust-resistant coating
    • Floating design with a single 59.84 mm (2.36 in) steel piston
    • Banjo inlet fitting and a 3/8x24 bleeder screw
    • Every unit is 100% tested
    • Intended for commercial use as well as performance vehicles

    Quick facts

    • Part: A1 CARDONE 2C-4778 brake caliper
    • Also called: disc brake caliper
    • Fits: 2001-2007 Ford Escape and other vehicles
    • Position: Front left
    • Material: Cast iron
    • Condition: New

    A pull to one side under braking, a soft pedal or fluid at the caliper can mean the caliper is binding or leaking. These signs alone do not prove the caliper is the problem, since a restricted brake hose can cause them too.

    Fits

    It fits the 2001-2007 Ford Escape, the 2001-2006 Mazda Tribute and the 2005-2006 Mercury Mariner. This listing is one caliper for the front left, and that position takes one; the front right is its own part, ordered separately, and the two are normally replaced together.

    Specifications

    Fit and size

    • Position: front left
    • Quantity per vehicle: 1 (this side)
    • Piston quantity: 1
    • Piston diameter: 59.84 mm (2.36 in)
    • Mounting hole diameter: 0.551 in
    • Bleeder thread size: 3/8x24
    • Inlet fitting: banjo

    Build and materials

    • Type: floating, unloaded
    • Casting material: cast iron
    • Piston material: steel
    • Finish: zinc plated, with a rust-resistant coating
    • Pad wear sensor: included
    • Condition: new
    • Country of origin: Vietnam

    In the box

    One caliper with its bracket, hardware kit, bleeder screw, anti-rattle spring, pad wear sensor and instruction sheet. Brake pads, abutment clips and mounting bolts are not included, so plan on new bolts.

    Installation notes

    • An instruction sheet comes with the caliper for the steps.
    • Use the brake fluid the vehicle maker recommends; the type is stamped on the master cylinder reservoir lid, and it should come from a new, sealed container.
    • A silicone grease is used on floating caliper mounting pins.

    Interchange: 5L8Z2B121AC · 6L8Z2B121BA · YL8Z2B121AB · ECZ13399ZD · EFY13399ZA · ZZC03399Z

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    5L8Z2B121AC, 6L8Z2B121BA, YL8Z2B121AB, ECZ13399ZD, EFY13399ZA, ZZC03399Z

    Frequently Asked Questions

    Does this caliper fit the 2001-2007 Ford Escape on the left front?

    Yes. A1 CARDONE 2C-4778 is a front left caliper that fits the 2001-2007 Ford Escape. The front right side is a separate part.

    Does this A1 CARDONE brake caliper come with a bracket and hardware?

    Yes. A1 CARDONE 2C-4778 includes the bracket, hardware kit, bleeder screw, anti-rattle spring and instruction sheet. Brake pads, abutment clips and mounting bolts are not included.

    How many pistons does this disc brake caliper have?

    One. It is a floating caliper with a single steel piston that measures 59.84 mm (2.36 in) across.

    Could a sticking caliper make the car pull to one side when braking?

    It can, and worn steering or suspension parts can cause it too. A shop can inspect both front calipers, their slides and pins, and the steering and suspension.

    What brake fluid should I use with this caliper?

    Use the brake fluid the vehicle maker recommends; the type is stamped on the master cylinder reservoir lid. Always pour it from a new, sealed container.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review