CARDONE New Disc Brake Caliper P/N:2C-2880
A1 CARDONE 2C-5403A front right brake caliper for the 2012-2020 Dodge Journey clamps the brake pads against the rotor to slow the wheel. This A1 CARDONE caliper is new and unloaded, and suits commercial use as well as performance vehicles.
A worn or failing caliper can mean the car pulls to one side under braking, a brake drags or sticks, or the pads wear unevenly. These signs alone do not prove the caliper is the problem, since a restricted brake hose is another common source of a pull.
This front right caliper is a direct-fit component for the 2012-2020 Dodge Journey, which takes one at this position. This listing is one caliper; the front left is a separate part, and the two front calipers are normally replaced together.
Fit and size
Build and materials
One brake caliper, mounting bracket, hardware kit, abutment clips, one bleeder screw, pad wear sensor and an instruction sheet. Brake pads and mounting bolts are not included, so plan on new mounting bolts.
Interchange: 68144160AA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the A1 CARDONE 2C-5403A caliper fit the 2012-2020 Dodge Journey?
Yes, A1 CARDONE 2C-5403A is the front right caliper for the 2012-2020 Dodge Journey, which takes one at this position; the front left is a separate part.
Does this disc brake caliper come with brake pads?
No, pads are not included with A1 CARDONE 2C-5403A. It comes with the bracket, hardware kit, abutment clips, bleeder screw and pad wear sensor, but not mounting bolts.
Does this A1 CARDONE brake caliper have phenolic or steel pistons?
This caliper has two phenolic pistons. Swapping piston material is not recommended, because vehicle makers choose steel or phenolic for the intended use; follow the vehicle maker's recommendations.
Brakes squeal all the time: could this front right caliper be the reason?
Not necessarily; squeal can come from improperly installed pads, improperly installed brake hardware or an improper rotor finish, so check those during the brake job.
What grease goes on the mounting pins of this floating caliper?
Silicone grease is used on floating caliper mounting pins. For the hydraulic side, brake fluid should be the type the vehicle maker recommends, taken from a new sealed container.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.