CARDONE Reman Mass Air Flow Sensor P/N:74-10114
A1 CARDONE 86-10114 mass air flow sensor for the 2003-2010 Hyundai Elantra 4-cylinder 2.0L and other vehicles measures the air entering the engine and reports it to the engine control system. Its output tracks O.E. output curves, so the feedback to the engine control system stays accurate.
Hesitation, stalling, poor fuel economy or poor engine performance can point to a failing sensor, but they can also have other causes. Before you replace it, rule out those other causes: a look at the sensor element with the engine off for damage or a burnt smell, and a scan for trouble codes, help show whether this sensor is at fault.
This is the mass air flow sensor for a 2005 Hyundai Elantra 4-cylinder 2.0L, within the 2003-2010 run, and it also fits the 2005-2009 Hyundai Tucson 4-cylinder 2.0L and the 2006-2008 Hyundai Sonata 4-cylinder 2.4L. Each takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, so plan on new fasteners.
Interchange: 2816423700 · 2816423720 · 2816425000
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Hyundai Sonata mass air flow sensor fit a 2006-2008 Sonata with the 4-cylinder 2.4L?
Yes, A1 CARDONE 86-10114 fits the 2006-2008 Hyundai Sonata 4-cylinder 2.4L, and that engine takes one sensor.
Is this a Hyundai Tucson mass air flow sensor for the 2005-2009 Tucson with the 4-cylinder 2.0L?
Yes, A1 CARDONE 86-10114 fits the 2005-2009 Hyundai Tucson 4-cylinder 2.0L, one per vehicle. Open the "Vehicles it fits" section to check your exact year and engine.
Does the A1 CARDONE 86-10114 come with a mounting bracket or wiring harness?
No. The box holds one mass air flow sensor and an instruction sheet; mounting hardware, a mounting bracket and a wiring harness are not included.
What size are the inlet and outlet connections on this mass air flow sensor?
The inlet and outlet connections each measure 71.12 mm (2.8 in). The sensor has one rectangular male connector with 5 pin terminals.
What symptoms can a failing mass air flow sensor like this one cause?
Hesitation, stalling, poor fuel economy or poor engine performance can come from a failing mass air flow sensor. Faults inside the unit include cracked circuit boards, burnt sensing elements and poor solder joints.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.