CARDONE Reman Mass Air Flow Sensor P/N:74-50070
CARDONE New 86-50070 mass air flow sensor for the 2009-2018 Subaru Forester H4 2.5L and other vehicles measures the air entering the engine. The engine control system uses that reading to help set fuel delivery.
Hesitation, stalling, poor fuel economy or weak engine performance can come from a faulty mass air flow sensor, but other faults produce those symptoms too. Before buying a replacement, look over the sensor element and housing with the engine off for cracks, damage or a burnt smell, and have the trouble codes read with a scanner.
It is also a mass air flow sensor for the 2012-2016 Subaru WRX H4 2.5L and for the 2008-2018 Subaru Outback H4 2.5L and 2010-2018 Outback H6 3.6L. If your car is not named here, open the "Vehicles it fits" section and check your exact model and engine. The 2009-2018 Subaru Forester H4 2.5L takes one sensor, and O.E. fit and function are guaranteed.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, so plan on new bolts rather than reusing old ones.
Interchange: 22680AA380 · 22680AA38A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Subaru Forester mass air flow sensor fit the 2009-2018 model with the H4 2.5L engine?
Yes. CARDONE New 86-50070 fits the 2009-2018 Subaru Forester H4 2.5L, and that vehicle takes one. For another model or engine, open the "Vehicles it fits" section.
Does this maf sensor fit a Subaru Outback, either the 2008-2018 H4 2.5L or the 2010-2018 H6 3.6L?
Yes. Both the 2008-2018 Subaru Outback H4 2.5L and the 2010-2018 Outback H6 3.6L take this sensor, one per vehicle.
Does the CARDONE mass air flow sensor come with a wiring harness or mounting bracket?
No. The CARDONE New 86-50070 package holds the mass air flow sensor and an instruction sheet. Mounting hardware, a bracket and a wiring harness are not included.
How many pins does the connector on this mass air flow sensor have?
The sensor has one rectangular male connector with 5 male pin terminals. The sensor bolts on through two mounting holes.
How is this mass air flow sensor tested?
Each unit is 100% tested on automated computer test equipment for full functionality. Its components are rated to handle a broad range of temperature and altitude conditions.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.