CARDONE Reman Mass Air Flow Sensor P/N:74-51007
A1 CARDONE 74-10050 mass air flow sensor for the 1995-2002 Kia Sportage 4-cylinder 2.0L and other vehicles measures the air entering the engine. The remanufactured A1 CARDONE mass air flow sensor tracks O.E. output curves to give the engine control system accurate feedback.
A failing mass air flow sensor can bring on hesitation, stalling or poor fuel economy. These signs alone do not prove the sensor is at fault, since a vacuum leak can produce them too.
Listed for a wide range of Kia and Saab models, it covers the 1995-2002 Kia Sportage 4-cylinder 2.0L, the 1998-2001 Kia Sephia 4-cylinder 1.8L and the 2000-2001 Kia Spectra 4-cylinder 1.8L, and these cars need one sensor. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, and old hardware may not be reusable, so plan on new pieces.
Interchange: 0K01113210A · 0K01113210B · 0K08013210 · 0K9A313210 · 4660809 · 9128919
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Spectra mass air flow sensor right for the 2000-2001 Kia Spectra 4-cylinder 1.8L?
Yes. A1 CARDONE 74-10050 is listed for the 2000-2001 Kia Spectra 4-cylinder 1.8L, and the car takes one sensor. Open the "Vehicles it fits" section to check other models.
Is this a 2000 Kia Sportage mass air flow sensor, and does it cover the 1995-2002 Kia Sportage 4-cylinder 2.0L?
Yes. A1 CARDONE 74-10050 is listed for the 1995-2002 Kia Sportage 4-cylinder 2.0L, and that range includes the 2000 model year.
Does this remanufactured sensor come with a wiring harness or mounting bracket?
No. The package holds the mass air flow sensor and an instruction sheet. Mounting hardware, a bracket and a wiring harness are not included.
What size are the inlet and outlet openings on this mass air flow sensor?
The inlet connection is 70.1 mm (2.76 in) and the outlet is 67.62 mm (2.76 in). The connector is rectangular and male, with 4 pins.
How do I check a mass air flow sensor for damage?
With the engine off and cool, look at the sensor element for damage or a burnt smell, then read any stored trouble codes with a scan tool. A shop can run further tests.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.