CARDONE Reman Mass Air Flow Sensor P/N:74-10084
A1 CARDONE 74-10110 mass air flow sensor for the 2005-2008 Buick LaCrosse V6 3.6L and other vehicles measures the air entering the engine and reports it to the engine control system. This remanufactured A1 CARDONE mass air flow sensor tracks O.E. output curves and holds spec tolerances for accurate scan tool readings.
Hesitation, stalling or poor fuel economy can mean the sensor is failing. These signs alone do not prove this part is the problem, since a vacuum leak is another common cause.
The vehicles it fits include the 2005-2008 Buick Allure V6 3.6L, the 2004-2007 Cadillac CTS V6 3.6L and the 2005-2007 CTS V6 2.8L, and each takes one. If your car is not one of these, look for it in the "Vehicles it fits" section.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, and the old hardware may not be reusable, so plan on new pieces.
Interchange: 0280218115
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the Cadillac CTS mass air flow sensor for the 2005-2007 V6 2.8L and the 2004-2007 V6 3.6L?
Yes. A1 CARDONE 74-10110 fits both the 2004-2007 Cadillac CTS V6 3.6L and the 2005-2007 CTS V6 2.8L, and each takes one sensor.
Is this the Buick LaCrosse mass air flow sensor for the 2005-2008 V6 3.6L?
Yes. A1 CARDONE 74-10110 fits the 2005-2008 Buick LaCrosse V6 3.6L, one per vehicle. If your car is a different one, look for it in the "Vehicles it fits" section.
What comes with the A1 CARDONE 74-10110 mass air flow sensor?
You get one mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included.
What connector does this mass air flow sensor use?
It has one rectangular male connector with 5 male pin terminals. The housing is plastic, and it mounts with bolts and a hose clamp.
How can I check this mass air flow sensor for damage?
With the engine off and cool, look at the sensing element for damage or a burnt smell, and read trouble codes with a scanner. A cracked housing or circuit board means the sensor needs replacing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.