Remanufactured Mass Air Flow Sensor for 2002-2007 Mitsubishi Lancer & More - A1 CARDONE 74-60020

$209.99

Vehicles this part fits

    Part number: 74-60020
    UPC: 082617661515
    Weight: 2.10 LBS
    Item Package Quantity: 1
    $209.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE Reman Mass Air Flow Sensor P/N:74-60020
    CARDONE Reman Mass Air Flow Sensor P/N:74-60020
    $209.99
    $209.99

    A1 CARDONE 74-60020 mass air flow sensor for the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L and other vehicles measures the air entering the engine and reports it to the engine control system. This remanufactured unit tracks O.E. output curves.

    • 100% re-soldering of critical components for solid electrical connections and no intermittent failures
    • Spec tolerances held for accurate scan tool readings
    • On-car validation routines check durability and performance requirements
    • 100% tested on automated computer test equipment for full functionality
    • Components rated for demanding temperature variations

    Quick facts

    • Part: A1 CARDONE 74-60020 mass air flow sensor
    • Fits: the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L and other vehicles
    • Material: Plastic housing
    • Condition: Remanufactured

    A failing mass air flow sensor can show up as hesitation, stalling or poor fuel economy, but those signs can have other causes. With the engine off and cool, look at the sensor element for damage and for a burnt smell, and have the codes read with a scanner before you replace it.

    Fits

    It is a direct-fit air flow sensor for the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L. The same mass air flow sensor also fits the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L and the 1997-1998 Mitsubishi Montero Sport 4-cylinder 2.4L. This listing is one sensor, and the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L takes one.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Outlet connection diameter: 78.4 mm (3.2 in)
    • Mounting type: bolt-on, hose clamp
    • Mounting holes: 4
    • Connector: 1 rectangular male connector, 7 male pin terminals

    Build and materials

    • Condition: Remanufactured
    • Housing material: plastic
    • Electronics: circuit board
    • Country of origin: Mexico

    In the box

    One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, and the old mounting hardware may not be reusable, so plan on new pieces.

    Interchange: MD343605

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    MD343605

    Frequently Asked Questions

    Is this maf sensor right for the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L?

    Yes. A1 CARDONE 74-60020 is a mass air flow sensor listed for the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L, and that car takes one.

    Yes. A1 CARDONE 74-60020 is a mass air flow sensor listed for the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L, and that car takes one.

    Can I use this mass air flow sensor on a 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L?

    Yes. This sensor is listed for the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L, and that car takes one.

    Yes. This sensor is listed for the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L, and that car takes one.

    Can I use this mass air flow sensor on a 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L?

    Yes. This sensor is listed for the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L, and that car takes one.

    Yes. This sensor is listed for the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L, and that car takes one.

    Does the A1 CARDONE mass air flow sensor come with a wiring harness or mounting hardware?

    No. A1 CARDONE 74-60020 comes with an instruction sheet only. The mounting hardware, mounting bracket and wiring harness are not included.

    No. A1 CARDONE 74-60020 comes with an instruction sheet only. The mounting hardware, mounting bracket and wiring harness are not included.

    Does the A1 CARDONE mass air flow sensor come with a wiring harness or mounting hardware?

    No. A1 CARDONE 74-60020 comes with an instruction sheet only. The mounting hardware, mounting bracket and wiring harness are not included.

    No. A1 CARDONE 74-60020 comes with an instruction sheet only. The mounting hardware, mounting bracket and wiring harness are not included.

    How many terminals does this mass air flow sensor's connector have?

    The single rectangular connector is male and has 7 pin terminals. The outlet connection diameter is 78.4 mm (3.2 in).

    The single rectangular connector is male and has 7 pin terminals. The outlet connection diameter is 78.4 mm (3.2 in).

    How many terminals does this mass air flow sensor's connector have?

    The single rectangular connector is male and has 7 pin terminals. The outlet connection diameter is 78.4 mm (3.2 in).

    The single rectangular connector is male and has 7 pin terminals. The outlet connection diameter is 78.4 mm (3.2 in).

    What can go wrong inside a mass air flow sensor?

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. On this unit, 100% of the critical components are re-soldered.

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. On this unit, 100% of the critical components are re-soldered.

    What can go wrong inside a mass air flow sensor?

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. On this unit, 100% of the critical components are re-soldered.

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. On this unit, 100% of the critical components are re-soldered.

    Frequently Asked Questions

    Is this maf sensor right for the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L?

    Yes. A1 CARDONE 74-60020 is a mass air flow sensor listed for the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L, and that car takes one.

    Yes. A1 CARDONE 74-60020 is a mass air flow sensor listed for the 2002-2007 Mitsubishi Lancer 4-cylinder 2.0L, and that car takes one.

    Can I use this mass air flow sensor on a 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L?

    Yes. This sensor is listed for the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L, and that car takes one.

    Yes. This sensor is listed for the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L, and that car takes one.

    Can I use this mass air flow sensor on a 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L?

    Yes. This sensor is listed for the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L, and that car takes one.

    Yes. This sensor is listed for the 1998-2002 Mitsubishi Mirage 4-cylinder 1.8L, and that car takes one.

    Does the A1 CARDONE mass air flow sensor come with a wiring harness or mounting hardware?

    No. A1 CARDONE 74-60020 comes with an instruction sheet only. The mounting hardware, mounting bracket and wiring harness are not included.

    No. A1 CARDONE 74-60020 comes with an instruction sheet only. The mounting hardware, mounting bracket and wiring harness are not included.

    Does the A1 CARDONE mass air flow sensor come with a wiring harness or mounting hardware?

    No. A1 CARDONE 74-60020 comes with an instruction sheet only. The mounting hardware, mounting bracket and wiring harness are not included.

    No. A1 CARDONE 74-60020 comes with an instruction sheet only. The mounting hardware, mounting bracket and wiring harness are not included.

    How many terminals does this mass air flow sensor's connector have?

    The single rectangular connector is male and has 7 pin terminals. The outlet connection diameter is 78.4 mm (3.2 in).

    The single rectangular connector is male and has 7 pin terminals. The outlet connection diameter is 78.4 mm (3.2 in).

    How many terminals does this mass air flow sensor's connector have?

    The single rectangular connector is male and has 7 pin terminals. The outlet connection diameter is 78.4 mm (3.2 in).

    The single rectangular connector is male and has 7 pin terminals. The outlet connection diameter is 78.4 mm (3.2 in).

    What can go wrong inside a mass air flow sensor?

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. On this unit, 100% of the critical components are re-soldered.

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. On this unit, 100% of the critical components are re-soldered.

    What can go wrong inside a mass air flow sensor?

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. On this unit, 100% of the critical components are re-soldered.

    Cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating or loose circuit board components. On this unit, 100% of the critical components are re-soldered.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review