CARDONE Reman Mass Air Flow Sensor P/N:74-9529
A1 CARDONE 74-9526 mass air flow sensor for the 1995-1997 Ford Ranger 4-cylinder 2.3L, the 1995-2000 Ranger V6 3.0L, the 1998-2001 Ranger 4-cylinder 2.5L and other vehicles measures the air entering the engine and reports it to the engine control system. This remanufactured unit tracks O.E. output curves, so the control system gets accurate feedback.
A failing mass air flow sensor can show up as hesitation, stalling, poor fuel economy or weak engine performance. A vacuum leak, for one, produces similar symptoms, so these signs alone do not prove the sensor is at fault. The engine takes one sensor.
It is listed for a wide range of Ford, Mazda and Mercury models. It works as an Escort mass air flow sensor for the 1996 Ford Escort 4-cylinder 1.9L and the 1997-2002 Escort 4-cylinder 2.0L, and as a mass air flow sensor for the 1996-1999 Ford Taurus V6 3.0L. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One mass air flow sensor and one instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included, so plan on new mounting hardware.
Interchange: F67F12B579BA · F67F12B579EA · F67Z12B579B · F67Z12B579BB · F67Z12B579BBRM · F67Z12B579BBSC · F67Z12B579EA · F67Z12B579EBRM · FSD713215 · ZZM413210 · ZZM613210
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Ranger mass air flow sensor fit a 1998-2001 Ford Ranger 4-cylinder 2.5L?
Yes. A1 CARDONE 74-9526 is listed for the 1998-2001 Ford Ranger 4-cylinder 2.5L, and that engine takes one sensor. Open the "Vehicles it fits" section for other years and engines.
Is this the Ford Taurus mass air flow sensor for a 1996-1999 Taurus V6 3.0L?
Yes. A1 CARDONE 74-9526 is listed for the 1996-1999 Ford Taurus V6 3.0L, with one sensor per engine.
Does this mass air flow sensor come with a wiring harness or mounting bracket?
No. The box holds the sensor and an instruction sheet. Mounting hardware, a mounting bracket and a wiring harness are not included.
What size is the outlet connection on this remanufactured MAF sensor?
The outlet connection diameter is 3 in (73.5 mm). The sensor has one rectangular male connector with 4 male pin terminals.
What can I look for on a bad MAF sensor before replacing it?
With the engine off, inspect the sensor element for damage and check for a burnt smell; a scan tool shows trouble codes. Failed units often have cracked circuit boards or poor solder joints.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.