CARDONE Reman Power Steering Pump P/N:20-57888
A1 CARDONE 20-7254 power steering pump for the 1996-1998 Ford Taurus and other vehicles builds hydraulic pressure for the steering system. This remanufactured A1 CARDONE power steering pump replaces a worn unit.
A whining pump, steering that feels heavy or fluid seeping at the pump can mean the pump is worn, though binding steering components or a contaminated system can be behind them too, so find the cause before replacing the pump.
This is a direct-fit power steering pump replacement for the 1996-1998 Ford Taurus, the 1997-1998 Ford Sable and the 1996-1998 Mercury Sable. One pump serves the steering system, and this listing is a single pump. If your car is not named here, find its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One power steering pump, one instruction sheet and one sealing kit. Mounting hardware, the pulley, the reservoir cap and a filter are not included; plan on new mounting hardware, since the old fasteners may not be fit to reuse.
Interchange: E99Z3A674A · F0AZ3A674A · F0AZ3A674AARM · F1AZ3A674GBRM · F6DZ3A674EBRM · F00Z3A674AARM · F0OZ3A674AARM
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the A1 CARDONE 20-7254 the right Ford Taurus power steering pump for a 1996-1998 model?
Yes. A1 CARDONE 20-7254 fits the 1996-1998 Ford Taurus, and the "Vehicles it fits" section shows the other vehicles it fits.
Does this remanufactured power steering pump come with the pulley and reservoir cap?
No. The pulley, reservoir cap and mounting hardware are not included. The box holds the pump with its reservoir, an instruction sheet and a sealing kit.
What thread size is the outlet on the A1 CARDONE 20-7254 power steering pump?
A1 CARDONE 20-7254 has a 16x1.5 outlet thread and an O-ring hose port. The inlet is a barb with a 10.74 mm (0.423 in) diameter.
Why do I still have hard steering in one direction after fitting a new power steering pump?
The problem is most likely in the steering unit, since the pump does not know left from right. Check for binding steering components and repair as necessary.
My old pulley fits loosely on the replacement pump shaft. What should I do?
The pulley may have cracked on removal, or its bore may have enlarged if the shaft was mushroomed, so the pulley must be replaced. This pump is sold without a pulley.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.