Carlson Disc Brake Caliper Pin Kit P/N:14099
Carlson 14130 brake caliper pin kit for the 2007-2017 Jeep Wrangler and other vehicles guides the caliper so the pads meet the rotor squarely. This disc brake caliper pin kit is meant to be replaced whenever the friction material is, since brake hardware works as a system.
Uneven pad wear, brake noise or a pad that drags can mean the pins are worn; a sticking caliper piston or worn pads can be behind those signs too, so look for the cause before you replace anything.
The vehicles it fits include the 2007-2017 Jeep Wrangler, the 2014-2020 Chevrolet Impala and the 2001-2010 Volkswagen Jetta. The 2007-2017 Jeep Wrangler takes two, and the kit matches Original Equipment (OE) quality specifications. If your own vehicle is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
Two bolts and caliper guide pins. Dust boots, washers, caliper grease, sleeves, nuts and an instruction sheet are not included; old washers and nuts may not be reusable, so plan on new ones.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Carlson 14130 pin kit right for a 2007-2017 Jeep Wrangler?
Yes. Carlson 14130 fits the 2007-2017 Jeep Wrangler and is also listed for the 2014-2020 Chevrolet Impala. For other vehicles, use the "Vehicles it fits" section.
Does the Carlson 14130 kit come with grease, washers or dust boots?
No. Carlson 14130 has two bolts and caliper guide pins. Caliper grease, washers, dust boots, sleeves, nuts and an instruction sheet are not included.
What thread size do these caliper pin bolts have?
The thread size is M8-1.25 with a 20.3 mm thread length. The bolt is 30.5 mm long and the pin is 73.7 mm long.
How can I tell if my caliper guide pins are worn?
Uneven pad wear seen during a brake service, brake noise, or a pad that seems to drag can be signs. A brake shop can inspect the pins and the caliper to confirm.
Why replace caliper guide pins when changing brake pads?
Brakes work as a system, and the guide pins hold the brake piston in place for effective stopping. That is why the hardware is replaced when the friction material is.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.