Carlson 13523Q front brake hardware kit for the 2007-2019 Nissan Sentra and other vehicles keeps the brake pads moving in a uniform, stable motion. This Carlson brake hardware kit, also called a disc brake hardware kit, replaces worn pad locating clips and bushings.
- Low-friction PTFE coating to reduce drag
- Clip rubber compound that reduces brake noise
- Stainless steel with a dual PTFE and rubber coating
- Corrosion-resistant coating for harsh road conditions
Quick facts
- Part: Carlson 13523Q brake hardware kit
- Also called: disc brake hardware kit
- Fits: 2007-2019 Nissan Sentra and other vehicles
- Position: Front
- Material: Stainless Steel
- Condition: New
Brake squeal, a rattle from a front wheel or pads that wear unevenly can mean the clips and bushings are worn or corroded, but a seized caliper or worn-out pads can be behind the same symptoms, so work out which it is before you order.
Fits
The 2007-2019 Nissan Sentra, 2007-2012 Nissan Versa and 2007-2017 Nissan Tiida are among the vehicles this kit fits, and it matches Original Equipment (OE) quality specifications. These vehicles take one kit for the front brakes.
Specifications
Fit and size
- Position: Front
- Quantity per application: 1
Build and materials
- Type: Disc brake hardware kit
- Material: Stainless steel
- Finish: Dual-coated PTFE/rubber
- Dust boots: included
- Condition: New
- Country of origin: United States
In the box
Four rubber bushings, two caliper suspension bushings, two pairs of pad locating clips and dust boots.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
13523Q, H16227A, FH13523Q, 83826A, H18036A
Frequently Asked Questions
Does the Carlson 13523Q fit a 2007-2019 Nissan Sentra?
Yes, Carlson 13523Q is a front kit for the 2007-2019 Nissan Sentra. If your car is a different Nissan, look it up in the "Vehicles it fits" section.
Are dust boots included with this brake hardware kit?
Yes. The kit comes with dust boots, four rubber bushings, two caliper suspension bushings and two pairs of pad locating clips.
Is the Carlson 13523Q made of stainless steel?
Yes. Carlson 13523Q lists stainless steel as its material, with a dual-coated PTFE/rubber finish; the bushings in the kit are rubber. Country of origin is the United States.
Can a rattle from the front brakes come from worn pad clips?
Yes, worn or corroded clips can let the pads shift and rattle, and squeal or uneven pad wear can go along with that. A shop can inspect the brakes if you are unsure.
What does the dual coating on these clips do?
The PTFE reduces friction and drag, and the rubber compound in the clips reduces brake noise. Both are applied over the stainless steel.
