Carlson H5864Q front brake hardware kit for the 2003-2004 Ford F-350 Super Duty and other vehicles replaces the worn clips, springs and bushings in the front brake. Brakes are designed as a system, and the kit adds advance protection to help the brake perform at its optimum level.
- Helps deliver a quieter, more efficient braking system
- Low-friction PTFE coating to reduce drag
- Stainless steel parts made to suppress high stress levels
- Zinc finish on the stainless steel parts
Quick facts
- Part: Carlson H5864Q brake hardware kit
- Also called: disc brake hardware kit
- Fits: 2003-2004 Ford F-350 Super Duty and other vehicles
- Position: Front
- Material: Stainless Steel
- Condition: New
Rattling from the front brakes, pads that wear unevenly or a brake that drags can mean the clips and springs in a disc brake hardware kit are worn out or missing. Those signs alone don't prove the hardware is at fault; a seized caliper pin is another common cause.
Fits
It fits the 2003-2004 Ford F-350 Super Duty, the 2003-2004 Ford F-250 Super Duty and the 2000 Ford F-350 Super Duty. The kit matches OE quality specifications, and one kit goes on the front brakes of each vehicle.
Specifications
Fit and size
- Position: Front
- Quantity per application: 1
Build and materials
- Material: Stainless Steel
- Finish: Zinc
- Coating: low-friction PTFE
- Dust boots: included
- Condition: New
- Country of origin: China
In the box
Four spring pad spreaders, four rubber bushings, two caliper suspension bushings, two sets of four pad retaining clips and dust boots.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
H5864Q, H5863A, FHH5864Q, 81594A, H5871A
Frequently Asked Questions
Does the Carlson H5864Q kit fit the 2003-2004 Ford F-250 Super Duty?
Yes. Carlson H5864Q is a front kit for the 2003-2004 Ford F-250 Super Duty, and it also fits the 2003-2004 Ford F-350 Super Duty.
What comes in this Carlson brake hardware kit?
Carlson H5864Q has four spring pad spreaders, four rubber bushings, two caliper suspension bushings, two sets of four pad retaining clips and dust boots.
Is this brake hardware kit stainless steel, and what is the finish?
Yes. The kit's material is stainless steel, and the finish is zinc.
How can I tell if my front brake hardware is worn?
During a brake service, look for rust, cracks or springs that have lost tension. Rattling from the front brakes or uneven pad wear can mean the hardware is worn.
Will this kit make my brakes quieter?
Carlson H5864Q is designed to help deliver a quieter, more efficient braking system. Its low-friction PTFE coating reduces drag.
