Carlson Parking Brake Hardware Kit P/N:H7330
Carlson H7312 rear parking brake hardware kit for the 2003-2007 Ford E-250 and other vehicles replaces the small springs, pins and clips that keep the parking brake working. Parking brakes hold the vehicle in place when it is parked, and this Carlson parking brake hardware kit puts a fresh set of hardware in the rear brake.
A parking brake that feels loose, will not hold on a slope, or leaves a rear brake dragging can mean worn or missing hardware. Before you replace the kit, rule out a stretched cable or worn friction parts, because either one can leave a parking brake loose too.
It is a direct replacement for the 2003-2007 Ford E-250. Other vehicles that take it include the 2003-2007 Ford E-450 Super Duty and the 2003-2005 Ford E-350 Club Wagon. The rear axle of each takes one kit.
Fit and size
Build and materials
Three sets of two return springs, four hold-down pins, four hold-down clips, one lithium grease packet, two adjuster screws, two adjuster nuts and two adjuster screw tips.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Carlson H7312 hardware kit fit the 2003-2007 Ford E-250?
Yes, Carlson H7312 fits the 2003-2007 Ford E-250 and also the 2003-2007 Ford E-450 Super Duty. If your van is not named here, look up its year and model in the "Vehicles it fits" section.
What hardware comes in the Carlson H7312 parking brake kit?
Carlson H7312 contains three sets of two return springs, four hold-down pins, four hold-down clips, a lithium grease packet, two adjuster screws, two adjuster nuts and two adjuster screw tips.
Is this parking brake hardware kit for the front or rear brakes?
It is a rear kit, and the rear axle takes one kit.
How do I tell if my rear parking brake hardware is worn?
During a rear brake service, rust, a broken or stretched spring, or loose pins can point to worn hardware. A parking brake that will not hold can also mean it; a shop can find the cause.
Is the hardware in this Carlson kit corrosion resistant?
Yes, the hardware in this kit is corrosion resistant for use on harsh roads. The country of origin is China.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.