Carlson H7328 rear brake hardware kit for the 2003-2006 Jeep Wrangler and other vehicles replaces the springs, clips and adjuster parts of the rear parking brake. This Carlson drum brake hardware kit is a direct replacement for worn hardware, and because brakes work as a system, all of their parts need to be in good shape.
- Two purple return springs and two standard return springs
- Four hold-down clips with four hold-down pins
- Right-hand adjuster screws and nuts, plus adjuster screw tips
- Dust hole covers and a lithium grease packet in the same kit
- Corrosion-resistant hardware for harsh roads
Quick facts
- Part: Carlson H7328 brake hardware kit
- Also called: drum brake hardware kit, parking brake hardware kit
- Fits: 2003-2006 Jeep Wrangler and other vehicles
- Position: Rear
- Condition: New
A parking brake that holds weakly, rear brakes that drag, or a rattle from the rear drums can point to broken, stretched or missing springs, clips or pins. These signs alone do not prove this kit is the problem, since worn brake shoes could produce them too, so find the cause before you replace anything.
Fits
This kit is listed for a wide range of Jeep and Mazda models, led by the 2003-2006 Jeep Wrangler, the 2003-2005 Jeep Liberty and the 2003-2006 Jeep TJ. This listing is one kit; the 2003-2006 Jeep Wrangler takes one, and the quantity varies on some other vehicles.
Specifications
Fit and size
- Position: Rear
- Quantity per application: 1
Build and materials
- Corrosion resistant: Yes
- Condition: New
- Country of origin: China
In the box
Four return springs (two of them purple), four hold-down clips, four hold-down pins, two right-hand adjuster screws, two right-hand adjuster nuts, two adjuster screw tips, two dust hole covers and one lithium grease packet.
Installation notes
- The kit contains all the hardware needed for installation.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
H7328, H7296, FHH7328, BHKP7328, 3105
Frequently Asked Questions
Does the Carlson H7328 fit the 2003-2006 Jeep Wrangler?
Yes, Carlson H7328 is listed for the 2003-2006 Jeep Wrangler with one kit per vehicle; if your car is not named on this page, look it up in the "Vehicles it fits" section.
What comes in this parking brake hardware kit?
Carlson H7328 has four return springs, four hold-down clips, four hold-down pins, two adjuster screws, two adjuster nuts, two screw tips, two dust hole covers and a lithium grease packet.
Does the Carlson brake hardware kit use right-hand adjuster parts?
Yes. The adjuster screws and adjuster nuts in Carlson H7328 are right-hand parts, two of each, and the kit adds two adjuster screw tips.
What should I look for on worn rear parking brake hardware?
During a rear brake service, look for broken, stretched or missing springs, clips and pins, or a hold-down pin that has gone loose. A shop can test how well the parking brake holds.
Is Carlson H7328 for the front or rear brakes?
Rear. Carlson H7328 is a rear brake hardware kit, and this listing is sold as a single kit.
