Centric 122.66030 rear brake drum for the 2000-2005 Workhorse P30 and other vehicles gives the brake shoes a surface to press against when you stop. This Centric brake drum uses an OE style casting with outer cooling fins.
- Centric Premium line of brake drums
- Precision machined friction surfaces for smooth operation and reduced noise
- 100% mill balanced for vibration free performance
- Black painted exterior for corrosion resistance
- Material meets the SAE international standard for structural integrity
Quick facts
- Part: Centric 122.66030 brake drum
- Fits: 2000-2005 Workhorse P30 and other vehicles
- Position: Rear
- Condition: New
A worn drum can show up as a scraping noise, a pulsing brake pedal or a friction surface worn past its discard diameter. Before you replace the drum, rule out worn brake shoes, a leaking wheel cylinder or a noisy wheel bearing, since those can show up the same way.
Fits
Its fit, form and function are OE-matched for a wide range of Chevrolet, GMC and Workhorse models. The top ones are the 2000-2005 Workhorse P30, the 1996-2002 Chevrolet Express 2500 and the 1996-2002 Chevrolet Express 3500, and each takes two drums. Open the "Vehicles it fits" section to check your exact model and engine. This listing is one drum; the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: rear
- Quantity per vehicle: 2
- Nominal drum diameter: 330.2 mm (13.00 in)
- Maximum diameter (discard): 332.5 mm (13.09 in)
- Outside diameter: 427.482 mm (16.83 in)
- Bolt holes: 8, on a 165.1 mm (6.5 in) bolt circle
- Hub hole (register): 122.682 mm (4.83 in)
- Mounting hole diameter: 15.494 mm (0.61 in)
- Friction surface width: 100.33 mm (3.95 in)
- Height: 160.274 mm (6.31 in)
Build and materials
- Mounting type: floating
- Outer cooling fins: yes
- Exterior: black paint
- Balance: 100% mill balanced
- Condition: new
- Country of origin: China
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Will the Centric 122.66030 rear brake drum fit a 2000-2005 Workhorse P30?
Yes. Centric 122.66030 fits the 2000-2005 Workhorse P30, two per vehicle. For another model, open the "Vehicles it fits" section and check your exact model and engine.
What is the discard diameter of this rear brake drum?
Centric 122.66030 has a nominal drum diameter of 330.2 mm (13.00 in) and a maximum (discard) diameter of 332.5 mm (13.09 in).
Is the exterior of this rear brake drum painted or coated?
Yes. This rear brake drum has a black protective paint finish on the exterior for corrosion resistance.
How can I tell a rear brake drum is worn out?
A scraping noise, a pulsing brake pedal or a drum measured past its discard diameter can mean it is worn. A shop can measure the drum as part of a brake service.
How many bolt holes does the Centric 122.66030 drum have, and is it a floating mount?
Yes, it is a floating mounting type. Centric 122.66030 has 8 bolt holes on a 165.1 mm (6.5 in) bolt circle.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review