Cloyes Engine Timing Chain Tensioner P/N:9-6091
Cloyes 9-5323 timing chain tensioner for the 1997-2010 Ford F-150 V6 4.2L and other vehicles keeps the timing chain at the right tension.
A worn engine timing chain tensioner can let the chain go slack, which can show up as a rattle from the front of the engine or a check engine light, though both can have other causes. Find the cause before you replace anything: with the engine off and cool, look for oil seepage around the timing cover, and leave running tests to a shop. When the timing system is serviced, replace the chain, guides and sprockets along with the tensioner.
It is listed for a wide range of Ford, Lincoln and Mercury models, including the 1997-2010 Ford F-150 V6 4.2L, the 1994-2004 Mustang V6 3.8L, the 2004 Mustang V6 3.9L and the 1988-1995 Ford Taurus V6 3.8L. This direct-fit replacement is heat-treated for OE-level fit and function, and the fitment lists one tensioner per engine.
Fit and size
Build and materials
One timing chain tensioner with its shoe. Mounting bolts, other hardware and a gasket or seal are not included, so plan on new mounting bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Is the Cloyes 9-5323 a timing chain tensioner for the 1997-2010 Ford F-150 V6 4.2L?
Yes. Cloyes 9-5323 is listed for the 1997-2010 Ford F-150 V6 4.2L. For another Ford, Lincoln or Mercury, look up your year and engine in the "Vehicles it fits" section.
Is this a timing chain tensioner for the 1994-2004 Ford Mustang V6 3.8L?
Yes. Cloyes 9-5323 is listed for the 1994-2004 Ford Mustang V6 3.8L, and the 2004 Mustang V6 3.9L is listed too.
Does the Cloyes 9-5323 come with the tensioner shoe and mounting bolts?
Yes, the Cloyes 9-5323 includes its shoe. Mounting bolts, other hardware and a gasket or seal are not included.
Is this timing chain tensioner spring-loaded or hydraulic?
It is spring-type: the damper type is spring and the activation type is an activation pin. Cloyes tensioners can use spring tension or hydraulic pressure, depending on design and application.
What are the mounting hole sizes on this tensioner?
The tensioner has 3 mounting holes. The diameters are 0.27 in (6.858 mm) and 0.3 in (7.62 mm).
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.