VALEO 63301405 clutch flywheel conversion kit for the 2011-2018 Ram 2500 V8 5.7L or 6-cylinder 6.7L, the 2014-2018 2500 V8 6.4L and other vehicles replaces the dual mass flywheel (DMF) with a solid flywheel. This VALEO conversion kit places the long travel damper in the clutch disc instead.
- Solid flywheel in place of the dual mass flywheel, with the long travel damper built into the clutch disc
- F510 friction material, an organic compound with higher copper content, for heat dissipation
- Long travel damper with a friction plate of higher damper capacity to filter noise, vibration and harshness
- Solid flywheel combined with the clutch cover's increased clamp load to increase torque transfer efficiency
Quick facts
- Part: VALEO 63301405 clutch flywheel conversion kit
- Fits: 2011-2018 Ram 2500 V8 5.7L or 6-cylinder 6.7L, the 2014-2018 2500 V8 6.4L and other vehicles
- Condition: New
Slipping, a shudder or chatter as the clutch engages, or new drivetrain noise can mean the clutch and flywheel are worn, though a fault in the clutch master cylinder or slave cylinder can also be behind them, so find the cause before you replace anything.
Fits
The vehicles it fits include the 2005-2009 Dodge Ram 2500 6-cylinder 5.9L and the 2011-2018 Ram 3500 V8 5.7L or 6-cylinder 6.7L and the 2014-2018 3500 V8 6.4L. A vehicle takes one VALEO flywheel conversion kit. If your vehicle is not named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Pieces in the kit: 5
Build and materials
- Type: conversion kit with solid (single mass) flywheel
- Friction material: F510, organic compound with higher copper content
- Damper: long travel damper in the clutch disc
- Condition: New
- Warranty: Valeo 600,000 mile warranty on the single mass flywheel
- Country of origin: Korea, Republic of
In the box
One clutch disc, one clutch cover (pressure plate), one flywheel, one release bearing and one alignment tool.
Installation notes
- Bolt-on installation
- No special tools or pre-loading required
Interchange: 202.67001 · 05-124 · MU52179-1SK
383566 · 5224 · 52242FW · 95506 · 92675SK · 52087514 · 52104721AD · 52104721AG · 52104724AC · 52104855AB · 52107562AB · 55366325AB · 55366325AC · 55366325AF · 55366325AG · CRK1005FWHD · NU31754FW · NU521791SK · K7047901F · 53314
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
383566, 5224, 52242FW, 95506, 92675SK, 202.67001, 52087514, 52104721AD, 52104721AG, 52104724AC, 52104855AB, 52107562AB, 55366325AB, 55366325AC, 55366325AF, 55366325AG, CRK1005FWHD, NU31754FW, NU521791SK, 05-124, MU52179-1SK, K7047901F, 53314
Frequently Asked Questions
Does the VALEO 63301405 fit the 2011-2018 Ram 2500 with the 6-cylinder 6.7L?
Yes, VALEO 63301405 fits the 2011-2018 Ram 2500 V8 5.7L or 6-cylinder 6.7L and the 2014-2018 2500 V8 6.4L; for other vehicles, look up your year and engine in the "Vehicles it fits" section.
Does VALEO 63301405 include the release bearing and alignment tool?
Yes, VALEO 63301405 includes a clutch disc, a clutch cover (pressure plate), a flywheel, a release bearing and an alignment tool.
What friction material does the clutch disc in this conversion kit use?
The clutch disc uses F510 friction material, an organic compound with higher copper content that helps dissipate heat.
Where does the damper go when the dual mass flywheel is removed?
The long travel damper moves into the clutch disc, which has a friction plate with higher damper capacity to filter noise, vibration and harshness.
Are special tools needed to install VALEO 63301405?
No, it is a bolt-on installation that needs no special tools or pre-loading, and an alignment tool comes in the kit.
