Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:521-997
Dorman 521-798 front right lower control arm with ball joint for the 2002-2005 Dodge Ram 1500 connects the wheel to the frame. The arm lets the wheel follow the road, and the ball joint pivots as the suspension moves.
A worn arm, ball joint or bushing can show up as a clunk over bumps, loose or wandering steering, or uneven front tire wear. Worn tie rod ends, sway bar links or a wheel bearing can also be behind those symptoms, so pin down the source before you buy. This listing is one arm for the right side; the 2002-2005 Dodge Ram 1500 takes one here, the front left is a separate part, and the two are normally replaced together.
It is a direct replacement for the original equipment on the 2002-2005 Dodge Ram 1500.
Fit and size
Build and materials
One control arm with ball joint and pre-installed bushings, plus mounting hardware. A grease fitting is not included.
Interchange: 52106560AB · 52106560AC · 52106560AD · 52106560AE · 52106560AF · TC6246 · CA18031 · CK620743 · RK620743 · GS25199 · CMS25199 · 2606272 · 2606272M · 11CB25099 · SK521798 · 1506078 · X13CJ0807 · JTC2672
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman lower control arm 521-798 right for a 2002-2005 Dodge Ram 1500?
Yes. Dorman 521-798 is the front right lower control arm with ball joint for the 2002-2005 Dodge Ram 1500. The front left side is a separate part.
Are the Dorman control arm bushings already installed on this arm?
Yes. The rubber bushings and the ball joint come pre-installed, and the assembly is pre-greased, which saves time and labor.
Are these 2002-2005 Dodge Ram 1500 control arms sold as a pair?
No. This listing is one front right lower arm, and the left side is ordered separately. The two sides are normally replaced together.
What is this Dorman control arm made of?
Dorman 521-798 has an iron control arm with rubber bushings and additional coatings for rust and corrosion resistance. The ball joint stud is threaded, with a 14 mm thread diameter.
Does the control arm and ball joint assembly come with mounting hardware?
Yes. Dorman 521-798 includes mounting hardware. A grease fitting is not included.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.