Dayco 15330 accessory drive belt for the 1976-1979 Toyota Corolla 4-cylinder 1.2L and other vehicles carries power from the crankshaft pulley to the engine's belt-driven accessories.
A belt that is cracked, frayed or glazed, or that squeals at start-up, can be worn out. Before you replace it, rule out a worn tensioner or a pulley that is loose or out of line, since either one can wear a fresh belt the same way.
This belt also fits vehicles such as the 1983-1987 Ford F-250 V8 7.5L and the 1964-1965 Ford Mustang 6-cylinder 2.8L or 3.3L. If your car is not named here, enter its year, make and model in the "Vehicles it fits" section to find out whether this belt is listed for it.
Fit and size
Build and materials
One accessory drive belt. This listing is a single belt, and a vehicle in the fitment takes just the one.
Is Dayco 15330 a drive belt for the 1976-1979 Toyota Corolla 4-cylinder 1.2L?
Yes. Dayco 15330 fits the 1976-1979 Toyota Corolla 4-cylinder 1.2L, and that engine takes one belt.
Does Dayco 15330 fit the 1983-1987 Ford F-250 V8 7.5L?
Yes. Dayco 15330 is listed for the 1983-1987 Ford F-250 V8 7.5L, which takes one belt.
What temperature range is this Dayco accessory drive belt rated for?
This drive belt's operating range runs from -35 F to 175 F (-37.2 C to 79.4 C), and it is built to SAE J636 and SAE J637 standards.
What signs show a drive belt like the Dayco 15330 is wearing out?
Cracks, fraying, glazing or a squeal on start-up can point to wear. Look the belt over with the engine off and cool; a shop can test tension.
Is the Dayco 15330 a banded belt?
No. Dayco 15330 is not a banded belt; it has bottom cog construction, and this listing is one belt.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
