Dayco Accessory Drive Belt 17410 - view 2

Dayco Accessory Drive Belt 17410 - view 3

Accessory Drive Belt for 1967-1968 Dodge Charger & More - Dayco 17410

Be the first to review this product

$21.99

MPN: 17410

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Dayco Accessory Drive Belt P/N:17410

$21.99

Description

Dayco 17410 accessory drive belt for the 1967-1968 Dodge Charger 5.2L / 6.3L / 7.2L and other vehicles is a bottom cog belt, also called a V-belt, that carries engine power to the belt-driven accessories.

Bottom cog construction, not a banded belt
Synthetic rubber compound
Built to SAE J636 and SAE J637 standards
Operating range of -37.2 C to 79.4 C (-35 F to 175 F)

A squeal, cracking or fraying can mean the belt is worn, but a tired pulley or tensioner can make the same noise, so find the cause before you replace it. With the engine off and cool, look the belt over for cracks, frayed edges and damaged cogs. The belt is listed for a wide range of makes, including the 1959 Chrysler 300 6.7L / 6.8L and the 2001-2007 Freightliner Condor 8.3L / 8.9L. If your car is not named here, look it up on the Buyer's Guide tab.

Specifications

Fit and size

Effective length: 41 in (1041.40 mm)
Outside circumference: 41.27 in (1048.26 mm)
Top width: .53 in
Angle: 36 degrees
Quantity per vehicle: varies by application

Build and materials

Construction: bottom cog, not banded
Material: synthetic rubber compound
Standards: SAE J636, SAE J637
Operating temperature: -37.2 C to 79.4 C (-35 F to 175 F)
Country of origin: Indonesia

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

Frequently Asked Questions

Does the Dayco 17410 fit a 1967-1968 Dodge Charger 5.2L / 6.3L / 7.2L?

Yes, Dayco 17410 is listed for the 1967-1968 Dodge Charger 5.2L / 6.3L / 7.2L and the 2001-2007 Freightliner Condor 8.3L / 8.9L. Other vehicles are on the Buyer's Guide tab.

Is this Dayco accessory drive belt right for a 1959 Chrysler 300 6.7L / 6.8L?

Yes, Dayco 17410 is listed for the 1959 Chrysler 300 with either the 6.7L or the 6.8L V8 engine, and that car takes one belt.

What size is the 17410 accessory drive belt?

This belt has a 41 in (1041.40 mm) effective length, a 41.27 in (1048.26 mm) outside circumference, a .53 in top width and a 36 degree angle.

What temperature range is this belt rated for?

This belt is rated for operating temperatures from -37.2 C to 79.4 C (-35 F to 175 F).

Is the Dayco 17410 a banded belt?

No, Dayco 17410 is a bottom cog belt, not banded. It is made of a synthetic rubber compound and built to SAE J636 and SAE J637.