Dayco Accessory Drive Belt P/N:22490
Dayco 17590 accessory drive belt for the 1969-1970 Ford F-250 V8 5.9L or 6.4L and other vehicles turns engine rotation into drive for the belt-driven accessories.
A squeal, cracks, fraying or a glazed surface can mean the belt is worn, though a misaligned pulley or a worn tensioner can lead to these signs too, so find out which before you replace it.
This Dayco accessory drive belt fits the 1969-1970 Ford F-250 V8 5.9L or 6.4L, the 2003-2004 Mitsubishi Fuso FH L6-5.9L and the 1990-2002 Peterbilt 379 L6-14.6L, along with many other vehicles.
Fit and size
Build and materials
One accessory drive belt. The 1969-1970 Ford F-250 V8 5.9L or 6.4L takes one, and the 1990-2002 Peterbilt 379 L6-14.6L takes two.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Dayco 17590 belt fit a 1969-1970 Ford F-250 with the V8 5.9L or 6.4L?
Yes. Dayco 17590 fits the 1969-1970 Ford F-250 V8 5.9L or 6.4L. To check another vehicle, look up its year, model and engine in the "Vehicles it fits" section.
What temperature range is the Dayco 17590 belt made for?
Dayco 17590 lists a minimum operating temperature of -35 F (-37.2 C) and a maximum of 175 F (79.4 C).
Is this bottom cog drive belt a banded belt?
No. This accessory drive belt is not a banded belt. Its construction is bottom cog.
How can I tell if this drive belt is worn?
With the engine off and cool, look for cracks, fraying or a glossy, glazed surface. A squeal or accessories that seem weak in normal driving can also point to wear.
Which standards does the Dayco 17590 belt follow?
Dayco 17590 is listed to SAE J636 and SAE J637. Its compound is synthetic rubber.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.