Dayco 23550 accessory drive belt for the 1948-1950 Ford F-1 V8 3.9L and other vehicles carries engine power to the fan and generator. Its position is fan and generator, or fan, generator and water pump.
- Double-cog belt construction
- Synthetic rubber compound
- Built to SAE J636 and SAE J637 standards
- Operating temperature from -37.2 C to 79.4 C (-35 F to 175 F)
- 32-degree belt angle
Quick facts
- Part: Dayco 23550 accessory drive belt
- Fits: 1948-1950 Ford F-1 V8 3.9L and other vehicles
- Position: Fan and generator; fan, generator and water pump
- Material: Synthetic rubber compound
- Condition: New
A cracked, glazed or frayed belt, a squeal from the engine, or a fan or generator that turns poorly can mean this belt is worn, though a seized generator or a worn water pump bearing can be behind the same signs.
Fits
This belt is listed for a wide range of Ford, Lincoln and Mercury models, including the 1948-1950 Ford F-2 V8 3.9L and the 1948-1950 Ford F-3 V8 3.9L. If your car is not named here, look it up by year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: fan and generator; fan, generator and water pump
- Pieces per listing: 1
- Belt angle: 32 degrees
Build and materials
- Construction: double cog
- Compound: synthetic rubber
- Banded belt: no
- Standards: SAE J636, SAE J637
- Operating temperature: -37.2 C to 79.4 C (-35 F to 175 F)
- Condition: New
In the box
One accessory drive belt. This listing holds one belt, and the 1948-1950 Ford F-1 V8 3.9L takes one.
Interchange: 24-554
660 · 22553
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
660, NA, 24-554, 22553, C9PZ-8620-EP, H132809, BH194
Frequently Asked Questions
Does the Dayco 23550 belt fit the 1948-1950 Ford F-2 V8 3.9L?
Yes. Dayco 23550 is listed for the 1948-1950 Ford F-2 V8 3.9L. For a different car, look it up by year and engine in the "Vehicles it fits" section.
Which accessories does this accessory drive belt run?
This belt is listed for the fan and generator, or for the fan, generator and water pump.
What temperature range is this belt rated for?
This belt operates from -37.2 C to 79.4 C (-35 F to 175 F).
Is this Dayco accessory drive belt banded?
No. Dayco 23550 is a double-cog belt made from a synthetic rubber compound, and it meets SAE J636 and SAE J637.
How can I check this belt for wear?
With the engine off and cool, look along the belt for cracks, glazing, fraying or missing cog sections. A squeal while driving can also point to wear.
