PowerBond by Dayco PB1234N harmonic balancer for the 1992 Toyota Camry V6 3.0L, the 1992-2001 Camry 4-cylinder 2.2L and other vehicles mounts on the front of the crankshaft to damp torsional vibration. This listing is one balancer, and each engine takes one.
Signs that an engine harmonic balancer is wearing out can include a cracked outer ring, timing marks that no longer line up, or belt noise and vibration at the front of the engine. A worn belt, a weak tensioner or a tired accessory pulley bearing can be behind belt noise and vibration too, so find the cause before buying.
The 1996-2000 Toyota RAV4 and the 1999-2001 Toyota Solara 4-cylinder 2.2L are among the other vehicles it fits. Other Toyota models and years are covered as well, so open the Buyer's Guide tab and check your exact model and engine.
Fit and size
Build and materials
One harmonic balancer. The woodruff key, hardware, a crank trigger plate and installation instructions are not included, so plan on new fasteners, since the old ones may not be reusable.
Interchange: 594-139 · DA-22
102132 · 6005292
This part cross-references / interchanges with the following part numbers:
Is this Toyota Camry harmonic balancer right for the 1992 Camry V6 3.0L and the 1992-2001 Camry 4-cylinder 2.2L?
Yes. PowerBond by Dayco PB1234N fits the 1992 Toyota Camry V6 3.0L and the 1992-2001 Camry 4-cylinder 2.2L. For other models, open the Buyer's Guide tab and check your exact engine.
Does this Toyota Solara harmonic balancer fit the 1999-2001 Solara 4-cylinder 2.2L?
Yes. PowerBond by Dayco PB1234N fits the 1999-2001 Toyota Solara 4-cylinder 2.2L.
Does this cast iron harmonic balancer come with a woodruff key or bolts?
No. It comes alone: the woodruff key, hardware, a crank trigger plate and installation instructions are not included, so plan on new bolts rather than reusing old ones.
How many pulleys does this harmonic balancer have, and what sizes are they?
It has two integrated serpentine pulleys: one is 95.000 mm (3.741 in) and the other is 140.000 mm (5.512 in) in outside diameter.
Does PB1234N cross-reference to 594-139?
Yes. PowerBond by Dayco PB1234N is listed as an interchange for 594-139.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
