Dayco Engine Harmonic Balancer P/N:PB1009N
PowerBond by Dayco PB1375N harmonic balancer for the 2005-2008 Jeep Grand Cherokee V8 5.7L, the 2006-2010 Grand Cherokee V8 6.1L and other vehicles damps crankshaft vibration and carries the serpentine belt.
A cracked outer ring, a ring that has shifted on the hub or a pulley that wobbles can mean an engine harmonic balancer is worn. Belt noise and vibration can also start elsewhere, so with the engine off and cool, look the pulley and ring over for those signs first and leave any test that needs the engine running to a shop.
This harmonic balancer is listed for a wide range of Jeep, Dodge and Chrysler models, including the 2006-2008 Dodge Charger V8 5.7L, the 2006-2010 Charger V8 6.1L, the 2005-2008 Chrysler 300 V8 5.7L and the 2005-2010 300 V8 6.1L. The listing is one harmonic balancer, and a vehicle takes one. If your vehicle is not named here, look up your year and engine in the "Vehicles it fits" section before you order.
Fit and size
Build and materials
One harmonic balancer. A Woodruff key, mounting hardware and installation instructions are not included, so plan on new fasteners rather than reusing the old ones.
Interchange: 594-324 · 594-325 · DA-3470
102279 · 102302 · 6003417
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right harmonic balancer for the 2006-2008 Dodge Charger V8 5.7L?
Yes. The PowerBond by Dayco PB1375N is listed for the 2006-2008 Dodge Charger V8 5.7L and the 2006-2010 Charger V8 6.1L, one balancer per vehicle.
Is this the harmonic balancer for the 2006-2010 Jeep Grand Cherokee V8 6.1L?
Yes. PowerBond by Dayco PB1375N fits the 2006-2010 Jeep Grand Cherokee V8 6.1L and the 2005-2008 Grand Cherokee V8 5.7L, and the vehicle takes one.
Does the PB1375N harmonic balancer come with a Woodruff key or bolts?
No. This harmonic balancer is sold on its own; the Woodruff key, mounting hardware and installation instructions are not included.
What size is the crank bore and serpentine pulley on this harmonic balancer?
The crank bore is 37.45 mm (1.475 in). The one integrated serpentine pulley has 6 grooves and a 168.000 mm (6.615 in) outside diameter.
Is 594-324 the same part as the PB1375N harmonic balancer?
Yes. 594-324 is listed as an interchange number for the PowerBond by Dayco PB1375N harmonic balancer, which has a cast iron outer ring.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.