Harmonic Balancer for 1985-1993 Saab 900 - PowerBond by Dayco PB1424N

Be the first to review this product
$182.99
MPN: PB1424N
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Dayco Engine Harmonic Balancer P/N:PB1424N
Dayco Engine Harmonic Balancer P/N:PB1424N
$182.99

Tame torsional crankshaft vibration and keep the accessory belts driving with the Dayco harmonic balancer PB1424N from the Powerbond line. This engine harmonic balancer mounts on the crankshaft nose to absorb the twisting pulses of combustion while spinning the belt-driven accessories, and it installs as an OEM replacement for the 1985-1993 SAAB 900 (L4-2.0L).

  • Cast-iron outer ring for the balancing mass.
  • Three integrated pulleys, including two V-belt pulleys: Pulley 1 at 5.906 in (150 mm) outside diameter and Pulley 2 at 5.355 in (136 mm), each with a single groove.
  • Neutrally balanced with no counterweight.
  • Key dimensions: overall diameter 5.906 in (150 mm), overall width 2.186 in (55.50 mm), crank bore 1.379 in (35.01 mm), nose outside diameter 1.888 in (47.95 mm), and three bolt holes.

Note what is not in the box: no timing marks, no crank trigger/exciter plate, no Woodruff key, no mounting hardware, and no installation instructions—consult the vehicle service information for the correct fasteners and procedure. Country of origin: Australia. If a worn or separated original balancer is causing crank-pulley wobble or belt-driven vibration, this Dayco unit replaces it.

Interchange: 594-825 · DA-9000
594825 · DA9000 · 102091 · 6005234

This part cross-references / interchanges with the following part numbers:

102091, 594-825, 6005234, DA-9000

Frequently Asked Questions

Does the Dayco PB1424N fit my 1985-1993 SAAB 900 L4-2.0L?

Yes—it is listed for the 1985-1993 SAAB 900 with the L4-2.0L engine. Check the Buyer's Guide tab to confirm your exact vehicle before ordering.

Is any hardware or a Woodruff key included?

No. It ships without mounting hardware, a Woodruff key, or installation instructions. Consult the vehicle service information for the correct fasteners and whether they may be reused.

What pulleys does this balancer have?

It carries V-belt pulleys—Pulley 1 at 5.906 in (150 mm) outside diameter and Pulley 2 at 5.355 in (136 mm), each with a single groove.

What is the Dayco powerbond harmonic balancer designed to do?

It mounts on the crankshaft nose to dampen torsional vibration from combustion pulses and to drive the engine's V-belt accessories.

What are signs my harmonic balancer may need replacing?

A visible wobble at the crank pulley, a cracked or shifted outer ring, belt squeal, or engine vibration. Diagnose the cause before replacing, since these signs can have other sources.