Dayco 95043 timing belt for the 1981-1992 Volkswagen Jetta 4-cylinder 1.6L and other vehicles keeps the camshaft turning in time with the crankshaft. This engine timing belt is the camshaft-position belt in the engine's timing drive.
- Square tooth profile for the camshaft drive
- 135 teeth at a tooth pitch of 9.525 mm (0.375 in)
- Std Temp/Reinforced Teeth construction
- Effective length of 1286 mm (50.63 in)
Quick facts
- Part: Dayco 95043 timing belt
- Also called: engine timing belt
- Fits: the 1981-1992 Volkswagen Jetta 4-cylinder 1.6L and other vehicles
- Position: Camshaft
- Condition: New
Cracks, frayed edges, missing teeth or oil on the belt can mean a timing belt is worn. A worn tensioner, a tired idler pulley or a leaking seal can be behind these signs too, so find the cause before you buy a belt.
Fits
The 1981-1992 Volkswagen Jetta 4-cylinder 1.6L, the 1985-1992 Volkswagen Golf 4-cylinder 1.6L and the 1982-1985 Volkswagen Quantum 4-cylinder 1.6L are among the many vehicles it fits. If your car isn't named here, look it up by year and engine on this page's Buyer's Guide tab.
Specifications
Fit and size
- Position: camshaft
- Quantity per vehicle: 1
- Effective length: 1286 mm (50.63 in)
- Number of teeth: 135
- Tooth pitch: 9.525 mm (0.375 in)
Build and materials
- Tooth profile: square tooth
- Construction: Std Temp/Reinforced Teeth
- Condition: new
In the box
One timing belt. This listing is a single belt, and the 1981-1992 Volkswagen Jetta 4-cylinder 1.6L takes one.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this a VW Jetta timing belt replacement for the 1981-1992 Volkswagen Jetta 4-cylinder 1.6L?
Yes. Dayco 95043 fits the 1981-1992 Volkswagen Jetta 4-cylinder 1.6L. For other cars, look them up on the Buyer's Guide tab.
Does this VW Golf timing belt fit the 1985-1992 Volkswagen Golf 4-cylinder 1.6L?
Yes. Dayco 95043 fits the 1985-1992 Volkswagen Golf 4-cylinder 1.6L, and that engine takes one belt.
How many teeth and what profile does this timing belt have?
This timing belt has 135 teeth with a square tooth profile and a tooth pitch of 9.525 mm (0.375 in).
What does a worn timing belt look like?
Cracks, frayed edges, missing teeth or oil on the belt can mean it is worn. A shop can inspect the belt and judge whether it needs replacing.
What are the length and construction of Dayco 95043?
Its effective length is 1286 mm (50.63 in), and its construction is Std Temp/Reinforced Teeth.
Write a Review