Dayco HVAC Heater Hose P/N:87755
Dayco 88485 heater hose for the 2004-2007 Ford Freestar V6 3.9L or 4.2L and other vehicles carries hot engine coolant to the heater.
A coolant smell, damp spots around the hose or a heater that blows cool air can mean the HVAC heater hose is leaking or weak. Before ordering, look the hose over with the engine off and cool for cracks, swelling, soft spots or wet stains. Leaks and weak heat can also come from a loose clamp or a low coolant level, so find the cause first.
This hose fits the 2004-2007 Ford Freestar V6 3.9L or 4.2L and the 2004-2007 Mercury Monterey. Each of them takes one, at the heater inlet.
Interchange: KH321
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dayco heater hose 88485 fit the 2004-2007 Mercury Monterey?
Yes. Dayco 88485 is listed for the 2004-2007 Mercury Monterey, as the heater inlet hose.
Is this a heater inlet hose?
Yes. This heater hose is listed for the heater inlet position, and the vehicles it fits take one.
How can I tell if this heater inlet hose is worn?
With the engine off and cool, look for cracks, swelling or coolant stains on the hose. A dropping coolant level can also point to a leak.
Does Dayco 88485 replace KH321?
Yes. KH321 is listed as an interchange number for Dayco 88485, so the two cross-reference to the same hose.
Is Dayco 88485 right for the 2004-2007 Ford Freestar V6 3.9L or 4.2L?
Yes. Dayco 88485 is listed for the 2004-2007 Ford Freestar with either the V6 3.9L or the V6 4.2L engine.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.