Dayco Radiator Coolant Hose P/N:71538
Dayco 70281 radiator coolant hose for the 1999-2004 Nissan Frontier V6 3.3L and other vehicles carries engine coolant between the radiator and the engine. This Dayco radiator coolant hose is listed for upper and lower positions, including lower pipe to engine and upper engine to water pump.
A hose that is cracked, swollen, soft or weeping at the ends can leak coolant, but low coolant and overheating can have other causes too. With the engine off and cool, look the hose over and squeeze it by hand for bulges or a mushy feel, and find where the coolant is going before you replace it.
This hose fits the 1999-2004 Nissan Frontier V6 3.3L, the 1959 Chrysler 300 V8 6.7L or 6.8L and the 2000 Infiniti QX4, and many more vehicles. Open the "Vehicles it fits" section and check your exact model and engine there.
Fit and size
Build and materials
One radiator coolant hose, and each vehicle in the fitment takes one. A protective sleeve and a heat shield are not included.
Interchange: 20120S · 21145 · C0876 · 62457 · 20876 · 60289 · KM152 · 7851 · H135 · H16 · MR548 · MR594 · CH27 · CH62 · CH86
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dayco 70281 fit the 1999-2004 Nissan Frontier V6 3.3L?
Yes. Dayco 70281 radiator coolant hose is listed for the 1999-2004 Nissan Frontier V6 3.3L, and that vehicle takes one hose.
Will this hose work on a 1959 Chrysler 300 V8 6.7L or 6.8L?
Yes. Dayco 70281 is listed for the 1959 Chrysler 300 V8 6.7L or 6.8L. For other models and engines, check the "Vehicles it fits" section.
Does this Dayco coolant hose come with a heat shield or protective sleeve?
No. This listing is one hose, and neither a protective sleeve nor a heat shield is included.
Which SAE specifications apply to this radiator coolant hose?
The hose carries the SAE J20R4 Class D-1 and SAE J1684 Type EC specifications. It is a single I.D. hose with a 9 3/4 in (9.75 in) trunk height.
What are the signs a coolant hose is wearing out?
Cracks, bulges, a soft or mushy feel, or coolant residue at the ends can mean a hose is wearing out. A shop can pressure-test the cooling system if the leak is hard to find.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.