Dayco Radiator Coolant Hose P/N:70622
Dayco 70354 lower radiator coolant hose for the 1966 Chevrolet Suburban 6-cylinder 4.1L and other vehicles carries engine coolant between the oil cooler and the radiator. It is a single I.D. hose made of EPDM.
Coolant seepage at the hose ends, or a hose that looks cracked, swollen or soft, can mean the hose is wearing out. Before you replace it, rule out a loose clamp or a leak at the radiator or oil cooler fittings, since a leak there looks much the same. Check only with the engine off and cool.
The 1966 Chevrolet Suburban 6-cylinder 4.1L, the 1988-1989 Mercedes-Benz L1319 and the 1969 Chevrolet C10 Pickup 6-cylinder 4.1L fit this hose, along with many other vehicles. If your car is not named here, look up its year, model and engine in the "Vehicles it fits" section. Each vehicle takes one, on the lower run between the oil cooler and the radiator.
Fit and size
Build and materials
One lower radiator coolant hose. A protective sleeve and a heat shield are not included.
Interchange: 22022M · MC12 · C0489 · MH370 · 20489 · CH10 · 60432 · 5013 · KM5 · 7293 · H254 · MR695 · CH160 · MC119
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dayco 70354 hose right for the 1969 Chevrolet C10 Pickup 6-cylinder 4.1L?
Yes. Dayco 70354 lower radiator coolant hose fits the 1969 Chevrolet C10 Pickup 6-cylinder 4.1L. For any other vehicle, use the "Vehicles it fits" section.
Does the Dayco radiator coolant hose come with a protective sleeve or heat shield?
No. This listing is one hose without a protective sleeve or a heat shield. Those pieces are not included.
Is this Dayco coolant hose made of EPDM?
Yes. This lower coolant hose is EPDM, built as a single I.D. hose with a trunk height of 14 1/2 in.
How can I tell if this lower coolant hose is going bad?
With the engine off and cool, a cracked, swollen or soft hose, or coolant residue at the hose ends, can mean it is wearing out. A shop can pressure-test the cooling system.
Which SAE standards does Dayco 70354 meet?
Dayco 70354 is built to SAE J20R4 Class D-1 and SAE J1684 Type EC.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.