Dayco 70682 upper radiator coolant hose for the 1975-1976 Ford F-150 V8 5.9L or 6.4L and other vehicles carries coolant between the engine and the radiator. This Dayco coolant hose is a single I.D. hose.
- EPDM hose material
- Built to SAE J20R4 Class D-1 and SAE J1684 Type EC
- 15 in trunk height
Quick facts
- Part: Dayco 70682 radiator coolant hose
- Fits: 1975-1976 Ford F-150 V8 5.9L or 6.4L and other vehicles
- Position: Upper
- Material: EPDM
- Condition: New
Coolant leaks, a cracked, soft or swollen hose, or an engine that runs hot can mean the upper hose is worn. A thermostat, radiator cap or water pump can be behind the same signs, so find the cause before you buy. Inspect the hose only with the engine off and cool.
Fits
Fitment includes the 1975-1976 Ford F-150 V8 5.9L or 6.4L, the 1968-1976 Ford F-250 V8 5.9L or 6.4L and the 1968-1976 Ford F-100 V8 5.9L or 6.4L, and each of these trucks takes one hose. If your truck is a different Ford model, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Upper
- Quantity per vehicle: 1
- Hose type: Single I.D. hose
- Trunk height: 15 in
Build and materials
- Material: EPDM
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: New
In the box
One upper radiator coolant hose, without a protective sleeve or heat shield.
Interchange: RH266 · 052 · 21064 · 60745 · 60893 · 5046 · KM151 · KM255 · MR886
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
RH266, 052, 21064, 60745, 60893, 5046, KM151, KM255, MR886, C8TA-8260-K, C8TZ-8260-B, D1TA-8260-LA, D2TA-8260-UA, D6PZ-8260-G, BH1530
Frequently Asked Questions
Will Dayco 70682 fit a 1975-1976 Ford F-150 V8 5.9L or 6.4L?
Yes. Dayco 70682 is an upper hose for the 1975-1976 Ford F-150 with the V8 5.9L or 6.4L, and each truck takes one.
Does this Dayco radiator coolant hose come with a protective sleeve?
No. Dayco 70682 comes without a protective sleeve and without a heat shield; it is the hose only.
Which SAE standards does this upper hose meet?
Dayco 70682 is built to SAE J20R4 Class D-1 and SAE J1684 Type EC. Its material is EPDM.
How do I check an upper radiator hose for wear?
With the engine off and cool, look for cracks, a soft or swollen section, or coolant residue near the ends. A shop can pressure-test the cooling system if you can't find a leak.
Does Dayco 70682 cross-reference to 60745?
Yes. 60745 is on the Interchange line for Dayco 70682, along with other cross-reference numbers from different brands.
