Dayco 70998 upper radiator coolant hose for the 1993-1997 Hino FE2618 and other vehicles carries engine coolant between the engine and the radiator. This Dayco radiator coolant hose is sold individually, one hose per listing.
- Dual I.D. hose with 1 3/4 in and 2 in diameters
- EPDM hose construction
- Meets SAE J20R4 Class D-1 and SAE J1684 Type EC
- 18 in trunk height
Quick facts
- Part: Dayco 70998 radiator coolant hose
- Fits: 1993-1997 Hino FE2618 and other vehicles
- Position: Upper
- Material: EPDM
- Condition: New
Coolant stains near the ends, cracks, or a soft or bulging spot can mean the hose is worn. Before you replace it, rule out a loose clamp, a faulty radiator cap or a leak elsewhere in the cooling system as the source of the coolant loss or overheating. Look at the hose only with the engine off and cool.
Fits
This hose is listed for a wide range of Hino and Ford models, including the 1993-1997 Hino FF3018 and the 1993-1997 Hino FF3020, and each takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Upper
- Quantity per vehicle: 1
- Diameters: 1 3/4 in (1.75 in) and 2 in
- Trunk height: 18 in
Build and materials
- Hose type: Dual I.D. hose
- Material: EPDM
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: New
Interchange: 24268L · 21944 · 61122 · 21156 · 21254 · KM1037 · KM1408 · KM1781 · KM1883 · 7862 · 7965 · 8634
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does the Dayco 70998 upper hose fit the 1993-1997 Hino FF3018?
Yes. Dayco 70998 is listed for the 1993-1997 Hino FF3018, and that vehicle takes one hose. For any other model, open the "Vehicles it fits" section and check your exact engine.
Is this Dayco coolant hose made of EPDM?
Yes. The Dayco 70998 upper hose is EPDM and meets SAE J20R4 Class D-1 and SAE J1684 Type EC.
Which diameters does this dual I.D. radiator hose use?
This upper hose has a 1 3/4 in diameter and a 2 in diameter, which is what makes it a dual I.D. hose. Its trunk height is 18 in.
Does this upper radiator hose come with a heat shield or protective sleeve?
No. This hose does not include a protective sleeve or a heat shield.
What wear signs should I look for on this upper coolant hose?
Cracks, a bulging or soft spot, or coolant stains at the ends can mean the hose is wearing out. Look only with the engine off and cool, and have a shop check it if you are unsure.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review