Dayco Radiator Coolant Hose P/N:70622
Dayco 71494 lower radiator coolant hose for the 1990-1995 Toyota 4Runner V6 3.0L and other vehicles carries coolant between the radiator and the engine.
A lower hose that is cracked, bulging, soft or seeping at the ends can show up as coolant spots on the ground or a falling coolant level. With the engine off and cool, look the hose over and trace any wet spot to its source before you replace anything, since other cooling parts can leak in the same places.
It fits the 1990-1995 Toyota 4Runner V6 3.0L and the 1989-1995 Toyota Pickup V6 3.0L, and each takes one.
Fit and size
Build and materials
Interchange: 20069S · 22419M · 20780 · 22633 · 62496 · 7543 · 9266
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dayco radiator coolant hose fit the 1989-1995 Toyota Pickup V6 3.0L?
Yes. The Dayco 71494 lower radiator coolant hose fits the 1989-1995 Toyota Pickup V6 3.0L, and that vehicle takes one hose.
What is this Dayco coolant hose made of?
Dayco 71494 is made of EPDM and meets SAE J20R4 Class D-1 and SAE J1684 Type EC.
Is the 71494 a single I.D. hose?
Yes. This lower hose is a single I.D. hose with a 13 in trunk height.
How do I inspect a lower radiator hose for wear?
With the engine off and cool, look for cracks, bulges, soft spots or coolant seepage near the hose ends. If the cause is unclear, a shop can pressure-test the cooling system.
Does this lower radiator hose come with a protective sleeve or heat shield?
No. This hose has no protective sleeve and no heat shield.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.