Dayco 71763 upper radiator coolant hose for the 1995-2001 Jeep Cherokee carries coolant between the engine and the radiator. This Dayco coolant hose is a replacement for a worn upper hose in the cooling system.
- Dual I.D. hose with two different diameters
- Hose material is EPDM
- Comes with a protective sleeve
- Meets SAE J20R4 Class D-1 and SAE J1684 Type EC
Quick facts
- Part: Dayco 71763 upper radiator coolant hose
- Fits: 1995-2001 Jeep Cherokee
- Position: Upper
- Material: EPDM
- Condition: New
A cracked or swollen hose, or coolant seeping at either end, can mean the hose is wearing out. Before you replace it, rule out a stuck thermostat, a weak radiator cap or a tired water pump, since overheating can start with any of them. Look the hose over with the engine off and cool.
Fits
It fits the 1995-2000 Jeep Cherokee L6-4.0L and the 2001 Cherokee, and each takes one hose.
Specifications
Fit and size
- Position: Upper
- Quantity per vehicle: 1
- Dual I.D. diameters: 1.25 in (1 1/4 in) and 1.44 in (1 7/16 in)
- Trunk height: 14 in
Build and materials
- Hose type: Dual I.D. hose
- Material: EPDM
- Protective sleeve: included
- Condition: New
In the box
One upper radiator coolant hose with a protective sleeve. A heat shield is not included.
Interchange: 24607L · 23283 · 62193 · 1147 · 16021
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
24607L, 23283, 62193, 1147, 16021, 3555555853, 52005792, 52005795, 52028286, 52028419
Frequently Asked Questions
Which engine does the Dayco 71763 hose fit in the 1995-2000 Jeep Cherokee?
Dayco 71763 fits the 1995-2000 Jeep Cherokee with the L6-4.0L engine. The 2001 Jeep Cherokee is covered as well.
Is the Dayco radiator coolant hose 71763 an upper or lower hose?
Dayco 71763 is the upper radiator coolant hose. The lower hose is a separate part.
Does this upper hose come with a protective sleeve or a heat shield?
This upper hose comes with a protective sleeve. A heat shield is not included.
What are the diameters on this dual I.D. coolant hose?
This dual I.D. hose has diameters of 1.25 in (1 1/4 in) and 1.44 in (1 7/16 in), and its trunk height is 14 in.
How can I tell if my upper radiator hose is going bad?
Cracks, swelling or coolant seepage at the ends can mean a worn hose. Look it over with the engine off and cool; a shop can pressure-test the system.
