Dayco 72291 upper radiator coolant hose for the 2005-2010 Ford Mustang V6 4.0L carries coolant between the engine and the radiator. The Dayco coolant hose replaces an upper hose that has split, softened or started to seep.
- Single I.D. hose type
- EPDM hose material
- Meets SAE J20R4 Class D-1 and SAE J1684 Type EC
Quick facts
- Part: Dayco 72291 radiator coolant hose
- Fits: 2005-2010 Ford Mustang V6 4.0L
- Position: Upper
- Material: EPDM
- Condition: New
Coolant drips under the front of the car, a soft, swollen or cracked hose, or an engine that runs hot can all mean the hose is wearing out. Before you replace it, rule out a loose clamp, a worn radiator cap or a thermostat fault, since any of those can also leak coolant or overheat the engine.
Fits
This hose fits the 2005-2010 Ford Mustang V6 4.0L, and that engine takes one upper hose. The listing is for a single hose.
Specifications
Fit and size
- Position: Upper
- Quantity per vehicle: 1
- Trunk height: 19-1/2 in
Build and materials
- Hose type: Single I.D. hose
- Material: EPDM
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: New
In the box
One upper radiator coolant hose. A protective sleeve and a heat shield are not included.
Interchange: 24556L · 23050 · 62530 · KM4824 · 9715
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
24556L, 23050, 62530, KM4824, 9715, 4R33-8B274-AB, 4R3Z-8260-AA
Frequently Asked Questions
Does the Dayco 72291 upper hose fit a 2005-2010 Ford Mustang V6 4.0L?
Yes. Dayco 72291 is an upper radiator coolant hose for the 2005-2010 Ford Mustang V6 4.0L, and that engine takes one.
What SAE specifications does the Dayco radiator coolant hose meet?
Dayco 72291 is listed to SAE J20R4 Class D-1 and SAE J1684 Type EC. It is a single I.D. hose.
What material is this upper radiator coolant hose made of?
This upper radiator coolant hose is made of EPDM.
Does this coolant hose come with a protective sleeve or heat shield?
No. The box holds one upper radiator coolant hose, with no protective sleeve and no heat shield.
How can I check an upper coolant hose for wear?
With the engine off and cool, look along the hose for cracks, soft or swollen spots and coolant residue. A shop can pressure-test the cooling system if you want it tested.
