Dayco 72502 upper radiator coolant hose for the 2007-2009 Hyundai Santa Fe V6 3.3L carries coolant between the engine and the radiator. This Dayco coolant hose replaces an upper hose that has aged or started to leak.
- EPDM hose material
- Built to SAE J20R4 Class D-1 and SAE J1684 Type EC
- Single I.D. hose with a trunk height of 17 1/2 in
- Supplied without a protective sleeve or heat shield
Quick facts
- Part: Dayco 72502 radiator coolant hose
- Fits: 2007-2009 Hyundai Santa Fe V6 3.3L
- Position: Upper
- Material: EPDM
- Condition: New
Coolant seepage at the hose ends, a cracked, swollen or soft hose, or a temperature gauge that climbs can mean this upper hose is worn, though a fault in the radiator cap or thermostat can also be behind them.
Fits
This Dayco radiator coolant hose is a direct-fit replacement for the 2007-2009 Hyundai Santa Fe V6 3.3L.
Specifications
Fit and size
- Position: Upper
- Quantity per vehicle: 1
- Trunk height: 17 1/2 in (17.5 in)
Build and materials
- Hose type: Single I.D. hose
- Material: EPDM
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: New
In the box
One upper radiator coolant hose. The 2007-2009 Hyundai Santa Fe V6 3.3L takes one.
Interchange: 24591L · 23231 · 66261 · 9994
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does the Dayco 72502 upper radiator coolant hose fit the 2007-2009 Hyundai Santa Fe V6 3.3L?
Yes. Dayco 72502 is an upper radiator coolant hose made for the 2007-2009 Hyundai Santa Fe V6 3.3L, which takes one.
Does this upper radiator hose come with a protective sleeve or heat shield?
No. This hose does not contain a protective sleeve or a heat shield. The listing is one upper hose.
What SAE specifications is the Dayco 72502 hose built to?
Dayco 72502 is built to SAE J20R4 Class D-1 and SAE J1684 Type EC.
How can I tell if an upper radiator coolant hose is going bad?
Look for cracks, a swollen or soft spot, or coolant seepage near the hose ends, and only with the engine off and cool. A shop can pressure-test the cooling system.
What is this upper radiator coolant hose made of, and what is its trunk height?
The hose is EPDM and has a trunk height of 17 1/2 in. It is a single I.D. hose.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review