Dayco Radiator Coolant Hose P/N:72723
Dayco 72550 radiator coolant hose for the 2010-2011 Chevrolet Camaro V8 6.2L and other vehicles carries engine coolant to and from the radiator. It is listed for the lower pipe-to-radiator connection and the upper tee-to-radiator connection.
A cracked, swollen or soft hose, or coolant seeping at an end, can mean the hose needs replacing. Coolant loss or overheating alone does not prove the hose is at fault, since a leaking water pump can lose coolant too.
It fits the 2010-2011 Chevrolet Camaro V8 6.2L and the 2000-2005 Toyota MR2 Spyder, and each of these takes one.
Fit and size
Build and materials
Interchange: 20538S · 22275M · 23589 · 21982 · 16301 · 8672
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Dayco coolant hose right for the 2010-2011 Chevrolet Camaro V8 6.2L?
Yes. Dayco 72550 fits the 2010-2011 Chevrolet Camaro V8 6.2L, and the car takes one.
Will the Dayco 72550 work on a 2000-2005 Toyota MR2 Spyder?
Yes. Dayco 72550 fits the 2000-2005 Toyota MR2 Spyder, which takes one hose.
What is the outside diameter on the Dayco radiator coolant hose?
Both ends of this single I.D. hose measure 1 21/32 in across the outside.
Which SAE specifications are listed for this coolant hose?
This EPDM hose is listed to SAE J20R4 Class D-1 and SAE J1684 Type EC.
Does number 20538S cross-reference to this hose?
Yes. 20538S is one of the listed interchange numbers for this hose.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.