Dayco 73048 upper radiator coolant hose for the 2011-2023 Dodge Charger V6 3.6L and other vehicles carries coolant between the engine and the radiator.
- Single I.D. hose with a protective sleeve
- EPDM hose material
- Listed to SAE J20R4 Class D-1 and SAE J1684 Type EC
- Both ends have a 1 13/16 in outside diameter
Quick facts
- Part: Dayco 73048 radiator coolant hose
- Fits: 2011-2023 Dodge Charger V6 3.6L and other vehicles
- Position: Upper
- Material: EPDM
- Condition: New
Coolant drips at the hose ends, a soft, swollen or cracked hose, or a temperature gauge that climbs can mean this hose is worn, though a weak thermostat or a faulty radiator cap can be behind overheating too, so find the cause first. Inspect the hose only with the engine off and cool.
Fits
This hose fits the 2011-2023 Dodge Charger V6 3.6L, the 2011-2023 Chrysler 300 V6 3.6L and the 2011-2023 Dodge Challenger V6 3.6L. This listing is one hose, and the 2011-2023 Dodge Charger V6 3.6L takes one.
Specifications
Fit and size
- Position: upper
- Quantity per vehicle: 1
- Hose type: single I.D. hose
- Trunk height: 18 1/2 in
- Outside diameter, end 1 and end 2: 1 13/16 in
Build and materials
- Material: EPDM
- Protective sleeve: included
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: new
Interchange: 24732L · 66827 · 24599 · 17248
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
24732L, 66827, 24599, 17248, 55038160AA, 55038160AB, 55038160AC, 55038160AD, 55038160AE
Frequently Asked Questions
Will the Dayco 73048 work on a 2011-2023 Chrysler 300 V6 3.6L?
Yes. Dayco 73048 is an upper radiator coolant hose for the 2011-2023 Chrysler 300 V6 3.6L, and this listing is one hose.
Is this Dayco coolant hose the upper or lower hose?
It is the upper hose. Dayco 73048 is catalogued in the upper position, so it is not the lower hose.
What size are the ends on this radiator coolant hose?
Both ends have a 1 13/16 in outside diameter. The hose is EPDM and has a protective sleeve.
What SAE specifications does this Dayco radiator coolant hose list?
It is listed to SAE J20R4 Class D-1 and SAE J1684 Type EC. It is a single I.D. hose.
How can I tell if this upper radiator coolant hose is going bad?
Look for coolant drips at the ends, a soft, swollen or cracked hose, or a rising temperature gauge. Inspect with the engine off and cool; a shop can pressure-test the cooling system.
